Label Printers

Filter Products Showing 37 - 48 of 148 results
Categories

  • Ashe Sapphire S2

    Sapphire S2 Slitter Rewinder

    The Sapphire S2 is the only choice for ease of operation, repeatability and minimal downtime. The machine is acclaimed for its versatility in being able to handle many different products, without any changes to the machine operation.

    Our vacuum roller technology is a key feature of the machine, which requires no operator setting or maintenance throughout the life of the machine. The machine is also a total electric operation, no hydraulics are used in the machine.

    The machine has a maximum running speed of up to 800m/min and can be equipped with many options for automation, which help in reducing setup times. It is also now available in three rewind diameter configurations, being 600mm, 800mm or 1000mm.

    Read More

  • Ashe Sapphire S2T Turret

    Sapphire S2T Turret Slitter Rewinders

    The Sapphire S2T is the choice for the converter that is looking for maximum productivity and minimum downtime. This is achieved by the machine continuing to run, whilst the operator (or machine) takes off the finished rolls and puts new cores onto the rewind shaft.

    The cycle time of the Sapphire S2T can be as low as 15 seconds and will automatically cut the web (at set length), and apply the new incoming web onto new cores.

    Once again, the Sapphire S2T utilises our vacuum roller technology, and most options for minimising job setups can be added to the machine to increase productivity further. It also features a unique shaft support system (for larger rewind diameters) where the rewind shafts remain fully supported through the turreting sequence.

    Read More

  • Tidland Mark I and II Roll Savers

    Save your crushed core with Tidland’s Mark I or Mark II Roll Savers. These roll savers are designed to re-open crushed cores, allowing for shaft insertion on rolls that would otherwise be considered scrap material. The Roll Saver provides a return on your investment with its first use as the cost is comparable to that of a damaged roll, creating a positive impact on profit margins and warehouse space. Air shafts cannot be inserted into rolls with even with the slightest deformation, leaving damaged rolls useless. With a Tidland portable hydraulic Roll Saver, rolls can be salvaged.

    Read More

  • Ashe Diamond

    Diamond Duplex Rewinder

    The Diamond model has been designed to be a compact, cost effective solution whilst keeping production requirements in mind. The machine has been based on our renowned Sapphire range of machines, and therefore has the flexibility to be able to slit and rewind most products at high speeds.

    The machine is available in various configurations and all options within ASHE’s range are available to add onto the machine. The machine uses the ASHE vacuum roller technology and is hydraulic free, making it a total clean operation.

    The machine is supplied in a ‘one piece’ configuration, therefore making shipping and installation easy.

    Read More

  • Ashe Onyx

    DUPLEX SLITTER REWINDERS

    This versatile slitter rewinder is ideal for products like PP, PE and PET, and gives you a beautifully finished product. Low cost and easy to use, it’s ideal for start-up companies or those working to a tight budget.

    Ideal when space is at a premium, the Onyx is a one-piece machine with unwind, electronics and pneumatics all integral, making installation quick and easy.

    Read More

  • Ashe Opal Inline and Offline Turret Rewinders

    Label Inline and Offline Turret Rewinders

    The Opal turret range gives you matchless results even for the most challenging of finishes. From our competitively priced applications right through to the advanced glueless technology, all machines are ideal for narrow web producers.

    Your Opal can be set to run a given length or number of labels and will then cut and transfer the web without stopping. Each machine can run light or high tensions to allow a wider range of materials to run on one machine.

    Read More

  • Cooling Options for MAGPOWR Clutches and Brakes

    Used under slip conditions, MAGPOWR Clutches and Brakes generate significant heat that must be dissipated. Often, that heat is dispersed via that model’s convection cooling ability. If the application exceeds the dissipation capacity of a convection cooled model, additional heat dissipation capacity can be achieved through the addition of MAGPOWR’s forced air or water cooled options. The addition of these accessories can increase the heat dissipation capacity by 300-500 percent.

    FORCED AIR COOLED: The air hood and blower assembly is a pre-assembled shroud that forces air from the blower through the clutch or brake. Forced air-cooling is particularly useful on applications having a low RPM unit. Factory assembled units with this option are designated by the letter “A” after the model number.

    WATER COOLED: In these units water is forced into the hollow rotor through a tube in the shaft and is returned through the shaft to the special water fitting or coupling. Water-cooled clutches and brakes are designated by the letter “W” after the model number. Water fittings must be ordered separately.

    FORCED AIR & WATER COOLED: The Forced Air and Water Cooled combo on a MAGPOWR unit gives maximum heat dissipation capacity. Factory assembled units with both options are designated by the letters “WA.”

    OVERSPEED CONTROL: An additional option to these cooling methods on rewinds is to use the ‘inverse diameter’ option available with some of our open loop and closed loop controllers. The controllers limit overspeed and thus heat as a rewind roll grows in diameter and the rpm slows.

    Read More

  • Enercon Corona Treatment: Blown Film

    Corona Treaters For Films

    Enercon’s blown film treater has been specifically designed to meet the needs of the standard blown film line head on. It is equipped with covered ground rolls and segmented stainless steel electrodes. A compact and simple construction allows for 2 sided and adjustable lane treating.  The electrode system provides simple, trouble-free air-gap adjustment. Add in its economical price and you have a system that fits into any budget. For applications requiring greater system performance learn more about our standard Covered Roll treaters.

    Read More

  • Enercon Corona Treatment: CoronaFlex™

    Improving ink adhesion has never been easier with the new CoronaFlex™ corona treater. It is specifically designed for high speed flexographic presses and versatile digital printing applications.

    Corona treaters increase the surface energy of label stock to improve wettability and adhesion of inks and adhesives.

    CoronaFlex™ offers OEMs and printers powerful and reliable corona treatment through a compact footprint, intuitive operator interface and industry leading application expertise.

    Read More

  • Enercon Corona Treatment: Power Supplies

    Enercon expertly matches its power supplies with its surface treaters to optimize system performance for your specific application. Our leading power supply technology is based on over 35 years of power supply design and manufacturing. New power generator interface options for these systems provide tremendous installation savings and improved productivity.

    These ultra-reliable power supplies rely on the latest IGBT technology and are loaded with features that optimize productivity for any output requirement. Choose from the Compak™ 2000 and Compak™ 2000 Deluxe for applications requiring an output up to 15kw. Select the high performance Compak 9000™ for applications from 5-100kw. Both systems provide a 30 to 1 turndown ratio and broad load matching. Their universal design allows them to be used with any Enercon surface treater or other competitive system on the market today.

    Read More

  • Enercon PlasmaReady

    PlasmaReady™

    Enercon’s exclusive PlasmaReady™ Upgrade Program is designed to meet your future desire to upgrade your planned corona treater purchase to a variable chemistry Plasma3™ Atmospheric Plasma Treating System. Upgrading your purchase with Enercon’s PlasmaReady™ will reduce the future cost of system changeover to plasma.

    For a nominal investment, Enercon can design your corona treater station to be retrofittable for treating a wide range of substrates using our exclusive Plasma3™ atmospheric plasma treatment technology. As new materials challenge production processes, Plasma3™ technology will keep you on the leading edge by enhancing the surface energy and treatment longevity of the most challenging substrates.

    The Enercon PlasmaReady™ Upgrade includes the required station frame size modifications, as well as station preparation for variable chemistry control. When you ultimately upgrade your station to generate plasma treatment, you will realize the following benefits:

    • Higher Treatment Levels
    • Long-Lasting Surface Activation
    • Elimination of Pin-Holing
    • No Ozone is Produced
    • “Cold Flame” with Controlled Chemistry
    • Surface Morphologies Unaffected
    • Construction to any Production Width
    Read More

  • Fife D-MAX Enhanced Web Guiding System

    With the ability to control up to three guides from a single unit, the D-MAX Enhanced is an OEM friendly controller that builds on the power of the original D-MAX that has been praised in the industry for features like “dual rail” power, single, dual or triple drive options and ISaGRAF-based state machine programmability. The D-MAX Enhanced now offers power input reverse polarity protection, standard PTP-2 and PTP-1, Device Level Ring (DLR) connectivity, Add On Profile (AOP) for Rockwell Automation• PACs, any language support, a C-script programming language and backward compatibility with existing D-MAX controllers. The newly enhanced D-MAX is a major upgrade for operators.

    Read More