Label Printers
-
MAGPOWR IP-80 Current to Pressure Transducer
Read MoreVersatility, accuracy, durability and ease of use. These are the things you look for in a current-to-pressure transducer, and that’s exactly what you get in the MAGPOWR IP-80. Built into this compact, vibration- and shock-resistant industrial duty unit is an accurate, easy-to-read pressure gauge that monitors output pressure. The flexible IP-80 operates on normal filtered shop air and allows a wide variation in supply pressure, offers high flow and exhaust characteristics to insure rapid response of any clutch or brake and can be placed almost anywhere. The IP-80 includes the transducer, 20-psi reference regulator, dual reference air filters with automatic drains, air regulator and volume pressure booster.
-
MAGPOWR ISR Tension Sensing Roller
Read MoreThe MAGPOWR ISR series is a dead shaft tension sensing roller supported on both sides that uses tension sensors embedded in the roller to provide a signal proportional to tension in any unwind, rewind or intermediate web processing application.
When installed in place of a standard dead shaft idler roller, the ISR integrated tension sensing roller delivers precise web tension measurement with low temperature drift due to full Wheatstone bridge
construction on each load cell inside the roller. -
MAGPOWR LC-500G Low Tension Load Cells
Read MoreLightweight single strand applications including wire, fiber optics and filament textiles face the requirements of tension measurement. For various reasons, lighter, thinner, finer materials are now demanded, and manufacturers require tension controls that can help facilitate those demands.
MAGPOWR’s Low Tension Load Cells (LC-500G & LC-500GS1) have full wheatstone bridge strain gage configurations, and the meet the same industry leading specifications as all other MAGPOWR load cells. The LC-500G, designed to mount easily into almost any single strand installation, also employs 360 degrees of overload protection preventing the need for recalibration in the event of overload situations. For applications requiring special pulleys, the LC-500GS1 is available with provisions for a customer-supplied pulley.
-
MAGPOWR PA-90 and PA-2 Power Amplifiers
Read MoreMAGPOWR’s PA-90 and PA-2 Power Amplifiers are designed to provide the extra current required for controlling magnetic particle brakes and clutches in any tension control application. For use with DIGITRAC II, EZ-Trac, or VERSATEC, the PA-90 and PA-2 can be mounted inside the control’s enclosure, and receives its control signals directly from the tension control.
The PA-90 is used to control 90 VDC brakes and clutches only, while the PA-2 can be used to control either 24 or 90 VDC units. MAGPOWR’s power amplifiers also include reverse current circuitry as a standard feature, thus allowing greater controllability in the lowest torque range of the clutch or brake being operated.
-
MAGPOWR Perma-Tork Permanent Magnet Clutches and Brakes
Read MoreSmooth, precise control is the objective of all clutches and brakes, but few achieve one—never mind both—of these goals. MAGPOWR’s innovative Perma-Tork® permanent magnet clutches are capable of producing highly accurate, dependable torque, without the need of an external power source. The clutches (available in hysteresis or magnetic particle) use high energy, multi-pole magnets to establish lines of magnetic force that retard the motion of the center rotating disc, delivering smooth, precise control.
Designed for long-lasting, reliable performance, Perma-Tork clutches are commonly used in light torque control applications, including tensioning, torque limiting, magnetic coupling and testing.
-
MAGPOWR TC-5 Power Supply for Clutches and Brakes
Read MoreDependable current-regulated power supplies are imperative for the proper operation of all magnetic particle clutches and brakes, and MAGPOWR’s are no different. The MAGPOWR TC-5 is a solid state current regulated 90 VDC power supply. It has four current ranges of 1/8, 1/4, 1/2 and 1 amp, selected by a simple jumper on the circuit board. This unit also includes reverse current circuitry as a standard feature, thus allowing greater controllability in the lowest torque range of the clutch or brake being operated. The TC-5 is easy to work with, as the front panel meter indicates the current output and automatically reads full scale for each current range selected. The operator controls the output by rotating the front panel potentiometer.
-
MAGPOWR PS-24 and PS-90 Power Supply for Clutches and Brakes
Read MoreComplete control is the goal of any operation utilizing brakes and clutches. MAGPOWR’s PS-24 & PS-90 Power Supplies provide a small amount of reverse current circuitry as a standard feature to minimize the drag torque of a clutch/brake, allowing greater controllability in the lowest torque range.
These power supply units control any size MAGPOWR clutch or brake with optimum resolution. MAGPOWR’s current-regulated power supplies are used for the control of magnetic particle clutches and brakes in unwind, rewind, or intermediate tension control applications. With selectable current ranges, these compact enclosures can be mounted inside the machine cabinet, allowing your operator to adjust torque through a remotely mounted potentiometer or with a 0 to 10 vdc control signal from MAGPOWR Open Loop and Closed Loop controllers, or any control device like a computer or PLC.
-
MAGPOWR TSU Under Pillow Block Load Cells
Read MoreRuggedly constructed to stand up to mill duty and with built-in mechanical overload stops in both force directions, MAGPOWR’s TSU Under Pillow Block Load Cells can be bolted under your present roll support bearings and they will accurately measure the tension forces on the machine sensing the roll created by the web. It can display and control the web tension through MAGPOWR tension readouts and controls.
The TSU is best used with two load cells, one under each pillow block bearing that supports the sensing roll, which then will accurately measure the total force on the entire roll created by tension in the web, and the readout will be precisely displayed no matter what the position of the web.
-
Mark Andy Flexo Press 2200
Read MoreFlexographic Printing Press
The Mark Andy 2200 is one of the most recognizable flexographic printing presses in the industry. Its efficiency has stood the test of time and has been the foundation onto which many successful printers have built their businesses
-
Mark Andy Performance Presses P5E
Read MorePerformance Series
A Platform With Endless Opportunity
The Performance Series P5E features advanced servo controlled print station and die cutting platform design. The P5E is engineered for the converter looking to achieve productivity, extremely quick changeover and high quality levels at an appealing value.
Building on the unique print station design common to all Performance Series presses, the P5 is focused on productivity and efficiency. Its modular servo platform can be configured to support a variety of pressure sensitive and film applications.
-
-