MAGPOWR TSU Under Pillow Block Load Cells

Ruggedly constructed to stand up to mill duty and with built-in mechanical overload stops in both force directions, MAGPOWR’s TSU Under Pillow Block Load Cells can be bolted under your present roll support bearings and they will accurately measure the tension forces on the machine sensing the roll created by the web. It can display and control the web tension through MAGPOWR tension readouts and controls.

The TSU is best used with two load cells, one under each pillow block bearing that supports the sensing roll, which then will accurately measure the total force on the entire roll created by tension in the web, and the readout will be precisely displayed no matter what the position of the web.

Request Quote
Categories: , , , , ,

Description

Features:

  • Rugged industrial construction
  • Positive overload stops in both compression and tension modes of operation
  • Four foil strain gauges in a full Wheatstone Bridge
  • Simple installation
  • Ability to sense actual web tension
  • Load ratings from 50 to 5,000 lbs
  • UL and CE Approved

MAGPOWR TSU SPECIFICATIONS

  • Gage Resistance350 Ω
  • Excitation Voltage10 VDC maximum
  • Output Signal21 mVDC maximum per load cell at full load rating
  • Operating Temperature-30 to 95˚ C
  • Temperature Effect on Zero0.02% of rating per °C
  • Combined Non-linearity and Hysteresis0.5% of full scale maximum
  • Repeatability0.2% of full scale maximum
  • Overload StopsInternal at 105% to 150% of full load rating
  • Deflection at Full Load23 mm
Weight
  • TSU-11.93 kg
  • TSU-24.76 kg
  • TSU-316.33 kg
  • Connector KPT02E-10-6P
  • Mating Cable Assembly Use SCE Cable series
  • Mating Connector Only 12B 193-6  (pin A + power; pin B + signal; pin C – signal; pin D – power)

Related products

  • Tidland Ultrashaft Carbon Fiber Air Shafts

    The perfect combination of durability and high-speed operation in a lightweight, ergonomic air shaft is what operators will find in Tidland’s Ultrashaft Carbon Fiber Air Shafts. The Ultrashaft is available with a unique resin rich coating to provide further protection against abrasion, knife cuts, unexpected impact and normal wear and tear from daily shaft handling. This new Ultrashaft M30 results in a lighter overall shaft weight and eliminates guessing if the carbon fiber under a cracked sleeve is safe for your application.

    Further enhancements to the shaft include high-torque lugs and non-metallic retraction springs to virtually eliminate bladder failures giving you an ultra-reliable, ultra-durable, ultra-high speed, Ultrashaft.

    Read More

  • Tidland External Element Air Shaft

    Series 800 shafts feature innovative two-piece expanding elements, which deliver an impressive combination of balance and torque. These advanced shafts also feature self retraction, durable poly bladder, and a fail-safe multi-circuit air system, with check valves to ensure that a loss of air in one element will not affect the expansion and performance of the other elements.

    The Series 800 Strip Shaft is designed for medium- to heavy-duty in 76.2 mm (3 inch) to 508 mm (20 inch) ID cores. This shaft’s full-length strip design delivers excellent torque characteristics, making it ideal for general duty unwind and rewind applications.

    Read More

  • Tidland Leaf Shafts

    Years of successful roll control in the field testify to the excellent performance of the Leaf Shaft. Designed for a wide range of converting applications, these shafts are best for the elimination of thin wall core deformation. The 360º radial expanding grip along the entire leaf face delivers more winding surface and allows for the winding of single or multiple rolls, with or without cores.

    With smooth, polished external leaves, these shafts are particularly suited for delicate materials. Leaf Shafts are built tough, with bodies constructed of standard steel, alloy steel or aluminum, and internal tubes made of durable, hard-wearing rubber. Simple modular construction and standardized components mean quick off-the-shelf spares service and easy in-plant maintenance when necessary.

    Series 650 Leaf Shaft – designed for light to medium-duty in 2 inch to 6 inch (50.8 mm to 152.4 mm) ID cores, as well as in coreless operations. The versatility of this shaft has made it the most popular and widely used leaf shaft on the market today.

    Series 750 Leaf Shaft – designed for heavy-duty in 7 inch to 24 inch (177.8 mm to 609.6 mm) ID cores, as well as in coreless operations. The largest diameter leaf shaft available, this shaft is excellent for tougher jobs such as winding metal and foil strips. It can also be used as a reel spool for Paper reels and large paper machines

    Read More

  • Tidland Air Chucks

    These rugged, high-torque air chucks have established a reputation for reliable, non-slip grip that delivers maximum roll control, and permits the running of machines at maximum speed. Air Chucks grip a wide area of the inside core wall with a firm, even pressure that prevents slippage and increases core life. Popular models and sizes from NimCor have been added to the Tidland offering, creating the industry’s largest selection of Air Chucks to suit any need.

    Read More