Web Handling

Filter Products Showing 25 - 36 of 63 results
Categories

  • MAGPOWR DLCA-NET Digital Load Cell Amplifiers with Built-in Ethernet Communications

    The DLCA NET is a new load cell amplifier with embedded dual port communications including EtherNet/IP, PROFINET, Modbus TCP and EtherCAT. Also included are Rockwell features like EDS File based AOP add on profile, DLR Device Level Ring and PTP time stamping.

    The DLCA NET transmits calibrated tension values over the communications to a PLC, HMI or drive to display tension or be used in a tension control loop when not using a MAGPOWR tension control. The DLCA NET is available in 3 mounting options and is available as a single channel version to monitor tension in a single zone with separate left and right load cell inputs or as a dual channel amplifier for 2 separate tension zones.

    Read More

  • MAGPOWR DLCA Digital Load Cell Amplifier

    The new Digital Load Cell Amplifier (DLCA) is a low-cost, yet powerful and versatile DIN rail mounted digital amplifier. Even though the DLCA is compact in size it incorporates ease of use, setup with three push buttons, a four-segment display, fully programmable low pass filter for each output, tension alarm set points, quick and easy calibration, and even weightless load cell calibration.

    Read More

  • MAGPOWR DTR-65 Digital Tension Readout

    The DTR-65 is an easy choice when needing a tension displayed on a machine panel with the option to also output a tension reference to a drive or PLC for remotely displaying or controlling tension.

    A powerful and versatile panel-mounted digital amplifier used to display measured tension locally on a machine panel, the DTR-65 will multiply a millvolt tension signal to a usable 0 to 10 VDC and 4 to 20 mADC analog output.

    The DTR-65 is an 1/8 DIN panel mount enclosure that is IP65 protected on the face. It incorporates ease of use and setup with a keypad and a four-segment display, fully programmable low pass filter for each output, tension alarm set points, quick and easy calibration, and even weightless load cell calibration.

    Read More

  • MAGPOWR TSA Load Cell Amplifier

    When performance matters, the TSA Load Cell Amplifiers from MAGPOWR are head and shoulders above the competition, especially in the areas of drift and linear performance. These load cell amplifiers can measure tension in any moving web, wire, or strand.

    Load cell amplifiers provide power to one or two full- or half-bridge load cells, and amplify the tension measurement signal for display or feedback to any control device. They also allow maximum flexibility in the tension sensing range of any size sensor by providing a gain control range of 8:1 and a tare adjustment of 50 percent of the sensor rating.

    Read More

  • MAGPOWR Foot Mounted Magnetic Particle Clutch

    Given the scores of variables associated with any web processing operation, the last thing you want to worry about is a clutch. Thanks to the reliability and long life of the MAGPOWR C Series Magnetic Particle Clutch, an operator can mount this component, set it up and forget it. This magnetic particle clutch is cost-effective and provides silent operation, making it ideal for cycling and overload applications.

    This component features magnetic particles located inside the clutch between the O.D. of the rotor and the I.D. of the drive cylinder. With no current in the coil of this device, the particles are free to lie loosely between the rotor and the drive cylinder. When current is applied to the coil, it sets up a magnetic field in the stator. The magnetic particles line up with the magnetic field and couple the rotor to the drive cylinder. As the current is increased, the magnetic field increases and the coupling (or torque capacity) increases proportionally.

    Read More

  • MAGPOWR Global Series Clutches

    State-of-the-art magnetic particle technology featuring the latest materials and components, modern manufacturing techniques and a sleek design. MAGPOWR’s Global Series Clutches gives you all that and more.

    Smooth controllable torque, torque repeatability and torque independent of speed make these clutches suitable for many power transmission and tensioning applications. Long life is assured by polished seal surfaces, high temperature materials and rugged, compact construction.

    The clutch consists of two rotating members: the inner member is the rotor (output member, mounted on a rotating shaft) and the outer rotating member is the housing assembly (input member, driven by a gear, pulley or sprocket attached to the mounting rabbet provided on the side of the clutch housing). No couplings, mounting feet or other attachments are required, since the clutch becomes an integral part of your machine.

    Read More

  • MAGPOWR HEB250 High Efficiency Brake

    The MAGPOWR HEB250 pneumatic brake packs many powerful features into a compact design. Ideal for the demands of general converting and corrugating operations, the HEB produces higher torque at cooler brake pad temperatures. These cooler temperatures along with a thicker brake pad will ensure longer pad life to minimize downtime.

    The HEB is engineered for rugged environments, utilizing a single, ventilated cast iron rotor with a bi-directional flute design which allows for efficient cooling when used in either direction of rotation, a through bore and keyway design for easy mounting of the rotor to the brake shaft and an integrated set of caliper mounting brackets that can be mounted directly to the machine frame. These caliper mounting brackets are also an integral part of the safety guarding along with the caliper bodies to reduce the overall size of the brake.

    Web tension is accurately controlled by adjusting air pressure to the calipers, pushing brake pads against each side of the rotor to produce consistent brake torque.

    Read More

  • MAGPOWR Intrinsically Safe Load Cell Amplifier

    Safety is the key to any operation, that’s why the MAGPOWR IS-2 Intrinsically Safe Load Cell Amplifier is so valuable and important. The Model IS-2 amplifier provides intrinsically safe circuitry for UL Listed MAGPOWR load cells. It is specifically designed for safe, accurate measuring and controlling web tension in hazardous locations. When used with UL listed MAGPOWR load cells, the IS-2 is UL approved for Class I, Groups A, B, C and D; Class II, Groups E, F, G and Class III. This allows the load cells to be mounted directly in the hazardous area without air purging. The IS-2 amplifier is compatible with all MAGPOWR UL listed load cells, tension readouts and tension controls.

    Read More

  • MAGPOWR IPT-E Current to Pressure Transducer

    MAGPOWR’s IPT-E Current to Pressure Transducer provides two benefits right out of the box: its single manifold design facilitates its small size, and the unit requires absolutely no calibration, so it’s ready-to-use immediately. Versatile and easy to use, the IPT-E provides superior response, accuracy, and flow characteristics, which are critical in precise tensioning applications. The unit operates on 115/230 VAC, normal dry shop air, and accepts a 4-20 ma control input signal.

    Read More

  • MAGPOWR IPT Current to Pressure Transducer

    Space is always at a premium inside working machinery. MAGPOWR knows this well, and therefore constructed its IPT Current or Voltage to Pressure Transducer as a single-manifold design to surface mount inside a machine enclosure. It is designed to be mounted in any orientation with no affect on performance and offers multiple mounting options. The IPT can be mounted on standoffs through four provided mounting holes, or on a DIN 35 rail using the provided mounting clips, or in a customer supplied DIN 35 Modular Circuit Housing.

    Perfect for control applications, the IPT is ready to use right out of the box, requiring no calibration and providing superior response, accuracy, and flow characteristics. Versatile and easy to use, the IPT is an ultra-compact PC board level pressure controller that operates on 115/230 VAC and filtered dry shop air, and can accept either a current or voltage control input signal.

    Read More

  • MAGPOWR IP-80 Current to Pressure Transducer

    Versatility, accuracy, durability and ease of use. These are the things you look for in a current-to-pressure transducer, and that’s exactly what you get in the MAGPOWR IP-80. Built into this compact, vibration- and shock-resistant industrial duty unit is an accurate, easy-to-read pressure gauge that monitors output pressure. The flexible IP-80 operates on normal filtered shop air and allows a wide variation in supply pressure, offers high flow and exhaust characteristics to insure rapid response of any clutch or brake and can be placed almost anywhere. The IP-80 includes the transducer, 20-psi reference regulator, dual reference air filters with automatic drains, air regulator and volume pressure booster.

    Read More

  • MAGPOWR ISR Tension Sensing Roller

    The MAGPOWR ISR series is a dead shaft tension sensing roller supported on both sides that uses tension sensors embedded in the roller to provide a signal proportional to tension in any unwind, rewind or intermediate web processing application.

    When installed in place of a standard dead shaft idler roller, the ISR integrated tension sensing roller delivers precise web tension measurement with low temperature drift due to full Wheatstone bridge
    construction on each load cell inside the roller.

    Read More