Pressroom Ancillary Equipment
-
Harper Phantom Proofer Assembly
Read MoreThe Phantom Proofer Assembly is one of the most advanced “bladed” hand proofer on the market utilizing laser engraved anilox rolls. With a consistent loading pressure, it gives ink room manager the assurance that each operator will get the same color results with each drawdown.
-
Harper Phantom Traditional System
Read MoreThe Phantom Proofer is one of the most advanced “bladed” hand proofer on the market utilizing laser engraved anilox rolls.With a consistent loading pressure, it gives ink room manager the assurance that each operator will get the same color results with each drawdown
BENEFITS INCLUDE:
Ultra lightweight
XLT™ laser engraved anilox rolls at a 60° Hex angle
Quick change anilox roll mechanism
Solvent resistant transfer rubber roll
Quick change doctor blade
Easier to clean up
-
Harper Phantom Viscous System
Read MoreThe Phantom Proofer is one of the most advanced “bladed” hand proofer on the market utilizing laser engraved anilox rolls. With a consistent loading pressure, it gives ink room manager the assurance that each operator will get the same color results with each drawdown
BENEFITS INCLUDE:
Ultra lightweight assembly
XLT™ laser engraved anilox rolls at a 30° Hex angle
Quick change anilox roll mechanism
Solvent resistant transfer rubber roll
Quick change doctor blade
Easier to clean up
-
Harper QD™ Proofing System
Read MoreThe QD™ Proofing System is the very first system that is fully portable and utility free so it is not locked in the ink room. Carry it to the press and dial in your ink!
-
Harper QD™ Printer
Read MoreThe Future of Flatbed Printing.
The QD™ Printer can be configured with a number of different printing process heads such as a Standard QD Flexo Unit, Gravure/Offset Gravure Unit and a Flexo Print Head with Plate Cylinder Modular.
-
Graymills Superflo® Ink Filters & Surge Suppressors
Read MoreGraymills Superflo® filters are specially designed for flexographic and gravure ink systems, providing effective filtration to eliminate quality problems from contaminants that can also damage costly anilox rolls. Sizes for all printing applications. Filters are available standard (models HFLT/HFST/HFNT) or as surge suppressors (models DDPSFST/DDPSFNT).
Superflo® ink filters are designed to overcome the typical pressure drop and reduced ink flow due to clogging that occurs with ordinary filters. A permanent magnet (optional rare earth megaMAG available) suspended over the intake port traps ferrous particles which find their way into the ink and diffuses the flow outward into the filter screen flutes. Filtered material is trapped on the inside of the removable/reusable stainless steel filter cartridge. To clean, just remove the cartridge. All contaminants come out with it. Graymills Superflo® filters are self-draining – no wasted ink or messy leftovers.
-
Harper GEW Mini Lab UV Unit
Read MoreThe GEW mini laboratory unit will help maximize the number of ink draw downs per shift helping the ink room to deliver press ready inks to the press room on time day after day.
The combination of Harper ink proofers with GEW’s UV unit will increase the productivity of the UV ink techs.
-
Graymills Ink Pump Mixers
Read MoreTake variables out of your printing process. Keep your color and viscosity more consistent with a full line of mixers from Graymills. These in-tank mixers keep inks properly blended, which is especially important for users of diaphragm or peristaltic pumps.
Small tank mixers fit 2 and 5 gallon containers. They are available with air motors. Can be mounted to optional lid. Also available to fit in 10, 20 and 30 gallon round tanks.
Mixers for 55 gallon drums are available side or lid mounted. These mixers use piston-powered air motors that run steadily at low RPM for gentler mixing, using less air and reducing noise. These mixers are designed to assure mixing throughout the container, even into corners, eliminating dead spots and changes in viscosity or color density. Most units are also available with traditional vane-style motors, which provide higher mixing speeds.
-
Graymills MegaMag™ Filter Magnets
Read MoreFor Superior protection against anilox scoring/damage.
A rare earth magnet in a smooth stainless steel casing, with 10x the pulling power of a standard magnet; megaMAG™ is able to attract metal particles from within the filter body or ink tank. Unlike other rare earth magnets, megaMAG’s domed end design with no crevices releases particles easily when cleaning.
megaMAG™ is available for use in Graymills Superflo® filters HFST and HFNT or on an adjustable bracket (C-37327 or mini-megaMag bracket C-38745) for placing inside a tank or pail. Also available for use in DDFSFST and DDPSFNT surge suppressor filters. Retrofits to all existing Superflo® filters and surge suppressors.
-
Graymills Industrial Tanks, Lids, & Liners
Read MoreStandard Graymills ink tanks are round to promote circulation and eliminate “dead spots” in corners where heavier materials can drop out and stagnate, causing viscosity and color issues. Tanks are available in 10, 20, or 30 gallon capacity and feature a built-in sump for low pump-down to reduce ink waste. A rolled rim at the top of each tank provides reinforcement while eliminating sharp edges. Removable sparkles casters are included. Tanks are available in 14 gauge epoxy coated mild steel or stainless steel.
Lids have overlapping rims to reduce evaporation and add strength. A hinged portion allows easy refilling or manual viscosity readings. Holes are provided for return hose and/or bypass. Large handles make lifting easy. Available in nickel plated mild steel or stainless steel.
Optional reusable or disposable tank liners are another way to speed up changeovers.
-
Graymills Ink Pump Accessories & Parts
Read MoreGraymills offers an extensive line of ink pump hoses and pressroom accessories. These include – hoses, fountain supply nozzles, flow controls, tank liners, basket strainers, ink funnels, Zahn Cups, air filter/regulator/lubricator, quick connectors, and fittings.
Specialty line for peristaltic pump and ink pump accessories.
Full range of genuine replacement parts for all Graymills Ink Systems. This includes motors, impellers, rotors, pump heads, diaphragms, shafts, gaskets, etc.
-
Graymills Dial-A-Flow™ Variable Speed Ink Pump Control
Read MoreDial-A-Flow™ Variable Speed Ink Pump Control makes press operation easier and improves print quality. Dial-A-Flow replaces unpredictable and time consuming valve settings in ink delivery systems. Using one simple dial on a small control box, it’s quick and easy to set the ink flow rate needed, freeing up operators for other tasks and achieving better, more consistent results. Available for most new/existing centrifugal ink pumps. Operates on 50/60 Hz., UL U.S./Canada listed. NOT FOR USE IN SOLVENT ENVIRONMENTS.