Graphics
-
Fife SE-31 Intrinsically Safe Ultrasonic Sensor
Read MoreThe SE-31-IS Ultrasonic Sensor is specifically designed to perform in hazardous locations, Class I, Division 1, Groups C & D. Ideal for guiding thin or clear films, as well as most opaque webs, this sensor is fully certified under UL, cUL (US and Canada), and CENELEC (Europe).
The SE-31-IS has control range of 7.62 mm (0.3 inch), a sensing gap of 50.8 mm (2.0 inches), and requires the same 12 VDC power supply as most other Fife sensors. The maximum sensor voltage and current is protected through a safety barrier
located outside of the hazardous area. Maximum cable length from the sensor to the controller is 4.19 m (165 feet). -
MAGPOWR Global Series Brakes
Read MoreVersatility and flexibility are the real benefits found in MAGPOWR’s Global Series Magnetic Particle Brakes, as they provide smooth, repeatable, controllable torque independent of speed. This makes them suitable for all kinds of power transmission and tensioning applications. Sizes are available from 5.5 to 325 lb-ft of torque.
This line of brakes features state-of-the-art magnetic particle technology and its compact size is due to through-bores on all machined housings for ease of mounting. The M (Metric) series boasts full metric bores and keyways, as well as metric mounting hardware and setscrews to support international design requirements. The brakes are also available as 24 vdc or 90 vdc.
Models available by Rated Torque:
GBA: 7.5 Nm (5.5 lb-ft)
GBB: 14 Nm (11 lb-ft)
GBC: 35 Nm (26 lb-ft)
GBD: 75 Nm (56 lb-ft)
GBE: 135 Nm (100 lb-ft)
GBF: 441 Nm (325 lb-ft) -
MAGPOWR Foot Mounted Magnetic Particle Brakes
Read MoreTransform your reliable, durable, foot-mounted MAGPOWR C Series Clutches into brakes with the addition of a simple locking bracket. The unit can be adapted by installing a locking bracket on an existing foot-mounted clutch, or by simply ordering a factory-converted unit.
LB-1 / C-1
LB-3 / C-3
LB-10 / C-10
LB-50 / C-50
LB-100 / C-100 -
B Series Magnetic Particle Brakes
Read MoreB Series Shaft Mounted Magnetic Particle Brakes give operators exactly what they want: high-quality, dependable performance with no headaches. The magnetic particle brake is an inherently simple, durable device. They are easy to install, made of rugged cast iron for long life and have minimal moving parts, meaning the brakes can be mounted and start performing immediately. -
MAGPOWR B-7V and B-20V Vertical Magnetic Particle Brakes
Read MoreUnlike other magnetic particle brakes, a horizontal axis is not required for shafts utilizing MAGPOWR’s B-7V & B-20V Vertical Magnetic Particle Brakes, thanks in particular to the unit’s disk-shaped rotor. Other brakes sport cylindrical designs, requiring a horizontal shaft axis. The B-7V & B-20V operate with the axis vertical, horizontal, or at any other required angle—the space between the rotor and the two sides is filled with magnetic particles, so the unit can be operated in any orientation.
MAGPOWR’s B-7V & B-20V Vertical Magnetic Particle brakes, made of rugged cast iron for long life, are easy to install and have minimal moving parts, requiring very little installation and calibration. These brakes assist in smooth, repeatable torque that is proportional to current, and applications include tensioning of film rolls on vertical shafts, packaging machines and machine tools.
-
MAGPOWR Global Series Clutches
Read MoreState-of-the-art magnetic particle technology featuring the latest materials and components, modern manufacturing techniques and a sleek design. MAGPOWR’s Global Series Clutches gives you all that and more.
Smooth controllable torque, torque repeatability and torque independent of speed make these clutches suitable for many power transmission and tensioning applications. Long life is assured by polished seal surfaces, high temperature materials and rugged, compact construction.
The clutch consists of two rotating members: the inner member is the rotor (output member, mounted on a rotating shaft) and the outer rotating member is the housing assembly (input member, driven by a gear, pulley or sprocket attached to the mounting rabbet provided on the side of the clutch housing). No couplings, mounting feet or other attachments are required, since the clutch becomes an integral part of your machine.
-
MAGPOWR Foot Mounted Magnetic Particle Clutch
Read MoreGiven the scores of variables associated with any web processing operation, the last thing you want to worry about is a clutch. Thanks to the reliability and long life of the MAGPOWR C Series Magnetic Particle Clutch, an operator can mount this component, set it up and forget it. This magnetic particle clutch is cost-effective and provides silent operation, making it ideal for cycling and overload applications.
This component features magnetic particles located inside the clutch between the O.D. of the rotor and the I.D. of the drive cylinder. With no current in the coil of this device, the particles are free to lie loosely between the rotor and the drive cylinder. When current is applied to the coil, it sets up a magnetic field in the stator. The magnetic particles line up with the magnetic field and couple the rotor to the drive cylinder. As the current is increased, the magnetic field increases and the coupling (or torque capacity) increases proportionally.
-
MAGPOWR PS-24 and PS-90 Power Supply for Clutches and Brakes
Read MoreComplete control is the goal of any operation utilizing brakes and clutches. MAGPOWR’s PS-24 & PS-90 Power Supplies provide a small amount of reverse current circuitry as a standard feature to minimize the drag torque of a clutch/brake, allowing greater controllability in the lowest torque range.
These power supply units control any size MAGPOWR clutch or brake with optimum resolution. MAGPOWR’s current-regulated power supplies are used for the control of magnetic particle clutches and brakes in unwind, rewind, or intermediate tension control applications. With selectable current ranges, these compact enclosures can be mounted inside the machine cabinet, allowing your operator to adjust torque through a remotely mounted potentiometer or with a 0 to 10 vdc control signal from MAGPOWR Open Loop and Closed Loop controllers, or any control device like a computer or PLC.
-
Top Knife Blades
Read MoreTidland is your best resource for replacement blades manufactured to the exact specifications to perform in Tidland Knifeholders.
Replacement blades are available for Shear, Crush and Razor slitting in a variety of materials; 52-100 Standard Steel; D2 Alloy; Powder Metal; Ceramic Coated; Carbide and varying blade profiles (blade angle and/or tip radius) to suit any application.
Our most popular shear blades for Class II and Class III knifeholders are listed below.
Class II Shear Blade Dished D-2 Part No. 128401
Class II Shear Blade Dished/Flat Powder Metal Part No. 524621
Class III Shear Blade Dished D-2 Part No. 129833
Class III Shear Blade Dished/Flat Powder Metal Part No. 501835 -
Tidland Knife Rings, Slitter Shafts and Trim Chutes
Read MoreFrom slitter shafts to film slitting blades to maintenance tools, the Tidland line of accessory products will help you to make your slitting system give you peak performance.
Bottom Knife Rings and Spacers: Shear and Crush: D2 Alloy; Carbide; Ceramic.
Slitter Shafts: Series 900 GK External Element Air Expanding Slitter Shaft; Series 905 KT Tubular Mandrel; Series 910 KS Solid Mandrel.
Slitting Table Idler Rolls: Infeed; Outfeed; Segmented Idler Rolls; Aluminum; Steel; Different External Coatings to Suit Any Application; Idler Brakes.
Trim Chutes: Stainless Steel; Air Lubricated.
More accessories: Coalescing Air Filters and Regulator Assembly; Workbench Blade Change Clamp Fixture; Spare Blade Cartridges for Quick Blade Changes; Hex Key Sets for Knifeholders
For more detailed information on any particular item, please contact your Tidland sales associate. -
Easy Glider
Read MoreReduce setup time and increase your ability to compete on shorter runs with the Easy Glider from Tidland. The Easy Glider incorporates the best of both worlds; a true bearing for ease of movement, plus a dovetail guide bar for secure support and positive clamping. An industrial quality linear bearing rail is integrated into a traditional dovetail guide bar, and a precision recirculating ball bearing is designed into a Performance Series knifeholder mount. The two systems (dovetail and bearing) function independently without conflict. Easy Glider is available on new Performance Series knifeholders, and can be retrofit to existing units as well.
