Graphics
-
Fife SE-26B Digital Line Guide Sensor
Read MoreThe SE-26B is a visible white LED light sensor that can be used to guide to the center of a line or to an edge. The sensor provides two output signals to the Fife guiding controller, one for EDGE mode and
one for LINE mode. Featuring 100,000 lifetime hours, the lens and cover components can be unscrewed and interchanged to change the sensing orientation. -
Fife SE-46C Digital Line Guide Sensor
Read MoreThe SE-46C digital line sensor is capable of detecting lines, edges of lines and graphic patterns such as barcodes. It can also be used in low contrast conditions or with different patterns located close to each other, where traditional line sensors do not work. The SE-46C can also edge guide transparent films.
The OI-TS control panel for the SE-46C line sensor features a color touch screen, allowing for the image of the web to be displayed in full color, making the sensor calibration easy and intuitive. It is sufficient for the operator to select the desired reference line and press the automatic calibration key.
Thanks to the 30 mm wide field of view and the high resolution, the SE-46C sensor is suitable for the most demanding line guiding applications.
-
Fife DAC-005 Camera Sensor
Read MoreThe DAC-005 Diode Array Camera Sensor is the ideal solution for a wide range of difficult to sense materials from nonwovens to steel. The camera utilizes a total of 7,725 pixels and it can split the field of view into 31 sub-areas, creating virtual sensors. Each virtual sensor can detect one edge out of 255 total.
The small housing, internal light source and different C-mount lenses allow an installation under tight field conditions. Backward compatible with older F-mount lenses as an option. Its digital sensing offers high resistance to contamination, dust particles, oil, vapors, and water.
This sensor also has the ability to connect via Analog or Digital with fieldbus interfaces and runs in a variety of applications ranging from fixed sensor rewinding, center edge, and line guiding to web width measurement with an accuracy up to 0.02%. The DAC-005 is easily set up with D-MAX Operator Interface OI-N or Mini Operator Interface OI-S.
-
Fife DSE-17 Wide Band Infrared Sensor
Read MoreThe DSE-17 is a digital wide proportional band infrared sensor. The sensor is most suitable for applications where opacity or density variations may occur, such as tissue, non-woven, textile, paper, foil, and for many opaque films. It can track up to 4 independent web edges simultaneously.
When web width variations exist, the wide proportional band of the DSE-17 sensor eliminates the need for the manual repositioning of the sensor.
Thanks to its IP-65 rating the DSE-17 can be installed even in the presence of water spray or condensation. The digital technique is immune to higher levels of contamination, compared with traditional analog sensors. The contamination of the sensor acrylic window can be monitored via a proportional analog output signal. An air sweep system is available as an option. In addition the DSE-17 sensor is protected against the influence of ambient light.
-
Fife SE-15 Visible Light Sensor
Read MoreSmall, yet accurate, the SE-15 Visible Light Sensor is perfect for web applications where exact guiding is required and space is limited. With a control range of 10.2 mm (0.4 inch), this compact, lightweight sensor is best suited for edge guiding opaque, transparent, or reflective materials in most unwind and rewind applications.
This medium-gap reflex sensor utilizes a reflector mounted on the opposite side of the web and a co-axis optical visible red light for transmitted and received light beams. The effective gap between reflector and sensor can range from 25 mm (1 inch) up to 1 meter (39 inches). The sensor light signal is processed to filter out ambient and reflected light to provide reliable and accurate performance.
-
Fife SE-23 Infrared Sensor
Read MoreThe SE-23 Infrared Sensor delivers the unique combination of compact design and wide band versatility. This sensor has a control range of 50.8 mm (2.0 inches) and a standard sensing gap of 50.8 mm (2.0 inches).
Used widely in pairs to center guide, the SE-23 delivers unmatched performance for nonwoven and other materials where neck-down of the web is a problem. Additionally, the SE-23 can be used where substantial variations in the guide point are required.
-
Fife First*Edge SE-38 Digital Sensor
Read MoreThe SE-38 First*Edge Sensor is an all-digital web sensor specifically designed or materials with varying opacities. Such voids, common with spun bond and loosely woven materials, are often difficult to detect with typical Infrared sensors, and nearly impossible to detect with air or ultrasound.
With its unique 180º foldback prism, the SE-38 is capable of detecting the first edge of a web and then ignoring any and all subsequent variations. It has a standard sensing gap of 50.8 mm (2 inches) and a control range of 43.2 mm (1.7 inches) delivering precise, versatile control for single-edge or center guiding applications.
-
Fife DAC-005 Camera Sensor
Read MoreThe DAC-005 Diode Array Camera Sensor is the ideal solution for a wide range of difficult to sense materials from nonwovens to steel. The camera utilizes a total of 7,725 pixels and it can split the field of view into 31 sub-areas, creating virtual sensors. Each virtual sensor can detect one edge out of 255 total.
The small housing, internal light source and different C-mount lenses allow an installation under tight field conditions. Backward compatible with older F-mount lenses as an option. Its digital sensing offers high resistance to contamination, dust particles, oil, vapors, and water.
This sensor also has the ability to connect via Analog or Digital with fieldbus interfaces and runs in a variety of applications ranging from fixed sensor rewinding, center edge, and line guiding to web width measurement with an accuracy up to 0.02%. The DAC-005 is easily set up with D-MAX Operator Interface OI-N or Mini Operator Interface OI-S.
-
Fife DSE-17 Wide Band Infrared Sensor
Read MoreThe DSE-17 is a digital wide proportional band infrared sensor. The sensor is most suitable for applications where opacity or density variations may occur, such as tissue, non-woven, textile, paper, foil, and for many opaque films. It can track up to 4 independent web edges simultaneously.
When web width variations exist, the wide proportional band of the DSE-17 sensor eliminates the need for the manual repositioning of the sensor.
Thanks to its IP-65 rating the DSE-17 can be installed even in the presence of water spray or condensation. The digital technique is immune to higher levels of contamination, compared with traditional analog sensors. The contamination of the sensor acrylic window can be monitored via a proportional analog output signal. An air sweep system is available as an option. In addition the DSE-17 sensor is protected against the influence of ambient light.
-
Fife SE-23 Infrared Sensor
Read MoreThe SE-23 Infrared Sensor delivers the unique combination of compact design and wide band versatility. This sensor has a control range of 50.8 mm (2.0 inches) and a standard sensing gap of 50.8 mm (2.0 inches).
Used widely in pairs to center guide, the SE-23 delivers unmatched performance for nonwoven and other materials where neck-down of the web is a problem. Additionally, the SE-23 can be used where substantial variations in the guide point are required.
-
Fife SE-30 Edge Averaging Sensor
Read MoreThe SE-30 Edge Averaging Sensor has a control range of 0.150 inch and a sensing area of 2.0 inches. Its long sensing area is designed to measure the lateral position of the guided material, providing an innovative method of averaging irregularities in the web edge.
The advanced features of the SE-30 prevent guiding systems from correcting erroneous web errors caused by varying opacities, small imperfections, or voids, such as in meshtype materials.
-
Fife First*Edge SE-38 Digital Sensor
Read MoreThe SE-38 First*Edge Sensor is an all-digital web sensor specifically designed or materials with varying opacities. Such voids, common with spun bond and loosely woven materials, are often difficult to detect with typical Infrared sensors, and nearly impossible to detect with air or ultrasound.
With its unique 180º foldback prism, the SE-38 is capable of detecting the first edge of a web and then ignoring any and all subsequent variations. It has a standard sensing gap of 50.8 mm (2 inches) and a control range of 43.2 mm (1.7 inches) delivering precise, versatile control for single-edge or center guiding applications.