Echo-Pro & Echo-Cover roll covers will reduce downtime by keeping your rolls clean, safe from nicks and scratches, and ready for immediate changeovers.
Echo-Pro Roll Covers are constructed of vinyl and inner-lined with thick industrial felt padding.
View the cells of your anilox up close, and check for wear, damage and plugging.
Monitor the condition of your anilox inventory with the lighted Handheld TRM-C Series 400x microscope.
View the cells of your anilox up close, and check for wear, damage and plugging.
SHIELD-PRO™ Protective Roll Covers for Sleeve Anilox Rolls.
Shield-Pro™ SLIT is specially designed for all rollers and sleeves where installation on the Anilox roll on press is required. Shield-Pro™ UN-SLIT is specially designed for installation from the end of a sleeve when it is in service configuration for removal and or changing.
SOFTCOAT is a seamless, compressible surface especially suited to thin plate technology, its high level of compressibility reduces the deformation of the plate during printing.
It offers the optimal sleeve surface when printing difficult images that include both solids and half tones and will not need to use expensive foamed tapes. SOFTCOAT eliminates all of the problems caused by butt join and spirals that sometimes appear during printing when using wound surfaces do not crop up.
The perfect solution for a dirty problem. Anilox roll cleaner for water based, UV, and solvent Inks.
The Anilox Roll Cleaner – CeramClean II™ – will effectively & efficiently remove dried ink from the engraving without damaging the cell structure on ceramic and chrome cylinders. It will remove Water, UV and most Solvent based inks and in most instances will remove those tough stains found on the roll face.
CeramClean II™ is available in 2 Packs (2 -16 oz. bottles, 8 Packs (8-16 oz. bottles), 1 Gal. Tub, 5 gal container and 55 gal drums.
