Enercon corona sheet treaters offer sheet converters the in-house ability to treat a wide variety of non-porous polymer based materials and synthetic papers. These material types have inert and low surface energy preventing inks from properly adhering. In-line sheet treatment ensures successful printing by raising the substrate’s surface energy to allow inks to properly wet-out.
Pretreatment is ideal for any sheet printing process including lithography, UV, EB and Screen Printing. Common materials that require treatment include Polystyrene (PS), Polyvinylchloride (PVC), Polyethylene (PE), Polypropylene (PP), Polycarbonate (PC), and Polyester (PL). Enercon’s treatment technology is effective at treating leading synthetic materials including Teslin®, Kimdura®, Polyart® and Yupo®.
Graymills offers an extensive line of ink pump hoses and pressroom accessories. These include – hoses, fountain supply nozzles, flow controls, tank liners, basket strainers, ink funnels, Zahn Cups, air filter/regulator/lubricator, quick connectors, and fittings.
Specialty line for peristaltic pump and ink pump accessories.
Full range of genuine replacement parts for all Graymills Ink Systems. This includes motors, impellers, rotors, pump heads, diaphragms, shafts, gaskets, etc.
The GEW mini laboratory unit will help maximize the number of ink draw downs per shift helping the ink room to deliver press ready inks to the press room on time day after day.
The combination of Harper ink proofers with GEW’s UV unit will increase the productivity of the UV ink techs.
The XLT™ digital technology was developed for precisely transferring thin ink films with micron accuracy. We recommend and guarantee that when you work with the strongest, thinnest film of ink, you will get the best ink mileage, best print quality, easiest impression set-up, and you’ll get it at the most consistent levels possible.
The Intelligent Discharging Bar IDB-11 (shockless) we produce can be used in many sectors, such as textile manufacturing, paper, plastics, printing, in converting, packaging etc.
The anti-static bar IDB-11 is available in two versions: IDB-11-S for high speed up to 2000 m/min., for distance from 30 to 200mm and IDB-11-L for long distance from 150 up to 500 mm.
His design is very compact 40×25 mm and the profile is in FR-ABS filled with epoxy resin.
This anti-static bar has an integrate power supply, so no high tension cable is needed, only 12-24 V supply, the frequency is adjustable (0,5-20 Hz) and is provided with clean pin alert by a led.
White/blu flashing= ok, Violet= needs cleaning, Red=fault.
The tungsten emitters are connected resistively to high voltage, so there are no risks for the operator in the event of accidental contact.
Our antistatic bars are custom made according to customers’ requirements.
This antistatic bar has a slit where to place the M5 screws for fastening, so it is possible to place them anywhere for the entire length of the bar.
