Schlumpf USA Vertical Roll Lifters

Schlumpf’s vertical roll lifters, safely lift, load & stack rolls.

Lift and transport rolls by their core in a vertical position. A hoist is used to maneuver the rolls from a pallet, work table or to a cart.   Manufactured in the USA!

  • Below-the-hook lifting devices attach to standard hoist hooks
  • Safely lifts rolls by the core
  • Fail safe gripper design securely holds rolls
  • Capacities to 4,400lbs (2000 kg)
Request Quote
Categories: , , , ,

Description

Model

Best Use

Load Capacity
VRL-1000 Low Cost Lifting of rolls with 3″ and  6″ cores. Vertical only. 1,000 lbs (453 kg)
VRL-500-TA Lifting and Turning of rolls, for a variety of core sizes – Tilt Assisted. 500 lbs (226 kg)
VRL-1000-TA Greater capacity Lifting and Turning of rolls, for a variety of core sizes. – Tilt Assisted. 1,000 lbs (453 kg)
VRL-2200 Heavy roll weights, vertical only, for a variety of core sizes. 2,200 lbs (997 kg)
VRL-4400 Lifting a heavy roll by its core. 4,400 lbs (2,000 kg)

Related products

  • Fife Symat 50 Offset Pivot Guide

    Durable and versatile, the Symat 50 electromechanical offset pivot guide is engineered to accommodate web widths up to 533 mm (21 inches) wide and tensions up to 623 N (140 lbs). This guide is ideal for edge, line, or center guiding applications where short entry and exit spans are required.

    Built for long-lasting, reliable operation, the Symat 50 delivers fast response for highly accurate web positioning This guide is available with standard roller faces of 203 mm (8 inches) to 610 mm (24 inches). Optional Servo-Center provides automatic guide centering to speed the setup and threading process.

    Read More

  • Fife DSE-17 Wide Band Infrared Sensor

    The DSE-17 is a digital wide proportional band infrared sensor. The sensor is most suitable for applications where opacity or density variations may occur, such as tissue, non-woven, textile, paper, foil, and for many opaque films. It can track up to 4 independent web edges simultaneously.

    When web width variations exist, the wide proportional band of the DSE-17 sensor eliminates the need for the manual repositioning of the sensor.

    Thanks to its IP-65 rating the DSE-17 can be installed even in the presence of water spray or condensation. The digital technique is immune to higher levels of contamination, compared with traditional analog sensors. The contamination of the sensor acrylic window can be monitored via a proportional analog output signal. An air sweep system is available as an option. In addition the DSE-17 sensor is protected against the influence of ambient light.

    Read More

  • Fife Pro-Trac 200 Electromechanical Sensor Positioner

    The Pro-Trac 200 is a heavy-duty positioner engineered for continuous, reliable operation. Common application uses for the Pro-Trac 200 include chasing systems, moving-sensor center guide systems, web width measurement systems, or simple sensor positioning.

    Adaptable to almost any application, the Pro-Trac 200 features a dust-tight design, with ball bearings in all moving parts for low friction and extended operating life. Optional self-tracking cable carriers eliminate the risk of damaged cables. Available primarily as an electromechanical positioner, the Pro-Trac 200 is also available in hydraulic configurations.

    Read More

  • Fife Pro-Trac 100 Electromechanical Sensor Positioner

    The Pro-Trac 100 is a low-cost, self-contained sensor positioner designed for standard-duty operations. Supplied with remote controller/digital readout, the Pro-Trac 100 is easily adapted to any process line for remote and/or centralized positioning capabilities.

    This positioner uses an extruded aluminum body, providing a maximum overall length of approximately 1651 mm (65 inches). The Pro-Trac 100 is ideal for any edge guiding or center guiding application. Whether used as a completely self contained unit or added to an existing guide installation, various sensor mounting adaptors make virtually any orientation possible.

    Read More