Polywest Carbon Fibre Adapter
Adapters enable the printer to bridge large differences in print circumferences, where the standard printing plate has already reached its limit.With the combination of internal and external diameters between adapter and printing plate every desired print repeat length can be obtained. The technology of the “air cushion principle” is decisive for the simple mounting and demounting in the printing press. An existing compressed air supply provides adequate volume of air with the minimum pressure required. The adapters from POLYWEST are electro statically dischargeable according to Guideline 94/9/EG (formerly ATEX 95) and excel through their low weight, high stability and rigidity characteristics. The robust surface withstands frequent sleeve changes and enables simple sleeve mounting.
POLYWEST adapters have precise concentric run-out properties and are designed to provide a high level of torsion rigidity between plate sleeve and adapter to prevent skewing. A combination of high performance carbon fibres linked with a multi-layer build-up with GRP (glass fibre reinforced plastic) fulfills the requirements of flexo printing. The smooth running characteristics at high printing speeds (up to 600 m/min.) are achieved through the use of high quality CRP (glass fibre reinforced plastic).
Related products
-
Amut Bielloni Telia FSC – High Speed
Read MoreModel suitable for short or medium runs at high printing speed. Developed to print on any flexible materials and paper
-
Harper Scientific Shield-Pro™
Read MoreSHIELD-PRO™ Protective Roll Covers for Sleeve Anilox Rolls.
Shield-Pro™ SLIT is specially designed for all rollers and sleeves where installation on the Anilox roll on press is required. Shield-Pro™ UN-SLIT is specially designed for installation from the end of a sleeve when it is in service configuration for removal and or changing.
-
Polywest Softcoat
Read MoreSOFTCOAT is a seamless, compressible surface especially suited to thin plate technology, its high level of compressibility reduces the deformation of the plate during printing.
It offers the optimal sleeve surface when printing difficult images that include both solids and half tones and will not need to use expensive foamed tapes. SOFTCOAT eliminates all of the problems caused by butt join and spirals that sometimes appear during printing when using wound surfaces do not crop up.
-
Grafisk Maskinfabrik DC330 HYBRID
Read MoreHybrid Laser and Semi-rotary Finishing
The DC330HYBRID is the perfect solution for digitally printed webs. Simply download the file from the pre-press department and the laser module is ready. It fits an optional barcode reader for faster reload of existing jobs. The laser module is an independent module that can be retrofitted into any DC330. The laser power ranges from 100-400Watt (400-1000Watt peak). The standard DC330HYBRID configuration has flexo varnish, lamination, slitting and dual rewinding built in. The DC330HYBRID can be combined with GM’s automatic knife system for digital production.