MAGPOWR CSR Tension Sensing Roller

The MAGPOWR CSR series is a cantilevered tension sensing roller that uses tension sensors embedded in the roller to provide a signal proportional to tension in any unwind, rewind or intermediate web processing application.

When installed in place of a standard machine idler roller, the CSR tension sensing roller delivers precise web tension measurement with low temperature drift due to a full Wheatstone bridge construction on each load cell inside the roller.

Request Quote
Categories: , , , , ,

Description

Features:

  • Fast and easy installation
  • Optional readout in end of roll
  • Optional integrated RPM sensor
  • Flange and stud mount
  • Flange mount with through frame pigtail
  • Several diameters available between 80 and 152 mm (3.15 to 6 inches)
  • Roller materials in Aluminum, Steel and Stainless Steel
  • Seven load ratings
  • Lengths from 250 to 1000 mm (9.9 to 39.4 inches)
  • Force measurement in positive or negative direction
  • Optional integrated display offers display of actual tension on end of roller, weightless load cell calibration, 0 to 10 VDC output, digital filter of output and re-zero button
  • Five times overload protection in both force directions
  • Works as a stand-alone unit or with any MAGPOWR tension amplifier or tension control

CSR TENSION SENSING ROLLER SPECIFICATIONS

  • Gage Resistance350 ohms nominal
  • Excitation Voltage10 VDC maximum
  • Output Signal2.1 mV/V, 21 mVDC maximum, 0-10 VDC (when powered)
  • Combined Nonlinearity and Hysteresis0.5% of full scale maximum
  • Temperature Effect on Zero0.02% of rating per °C
  • Overload Stops Engagement105% to 200% of full load rating
  • Operating Temperature-30 to 60° C
  • Overload Protection5X full load rating
  • Repeatability0.2% of full scale maximum
  • Load Ratings50, 100, 250, 500, 750, 1000, 2200 Newtons
  • ConstructionStainless steel center shaft, aluminum, steel and stainless steel roller body
  • Roller Diameters80, 89, 102, 127 and 152 mm
  • Deflection at Full Load0.15 mm to 0.17 mm
  • Climate Class3K3 (EN60721)
  • Certifications
    IP54
    CE
    ROHS
    TUV
  • MAGPOWR Mating Cable
    CSRBL series with straight connector
    CSRCBLRA series with 90 degree connector
  • RPM Pulse Output Switch2 pulses per revolution, 30 VDC maximum, 25 mADC maximum

Related products

  • Tidland Spiral External Element Shaft

    Rewind Applications

    Series 850 takes our innovative two-piece expanding elements to a whole new level. The unique spiral design of the Series 850 provides a continuous 360º of radial grip and intrinsically equalized load distribution. These advanced shafts also feature a two-piece body design, self retraction, durable poly bladder, and a fail-safe multi-circuit air system, with check valves to ensure that a loss of air in one element will not affect the expansion and performance of the other elements.

    The Series 850 Spiral Strip Shaft is designed for medium to heavy-duty in 75 mm (3 inch) to 406 mm (16 inch) ID cores. The spiral strip design of this shaft minimizes vibration to deliver smoother operation and higher speeds. It’s an ideal choice for surface winders or with lay-on rolls.

    Read More

  • Tidland Leaf Shafts

    Years of successful roll control in the field testify to the excellent performance of the Leaf Shaft. Designed for a wide range of converting applications, these shafts are best for the elimination of thin wall core deformation. The 360º radial expanding grip along the entire leaf face delivers more winding surface and allows for the winding of single or multiple rolls, with or without cores.

    With smooth, polished external leaves, these shafts are particularly suited for delicate materials. Leaf Shafts are built tough, with bodies constructed of standard steel, alloy steel or aluminum, and internal tubes made of durable, hard-wearing rubber. Simple modular construction and standardized components mean quick off-the-shelf spares service and easy in-plant maintenance when necessary.

    Series 650 Leaf Shaft – designed for light to medium-duty in 2 inch to 6 inch (50.8 mm to 152.4 mm) ID cores, as well as in coreless operations. The versatility of this shaft has made it the most popular and widely used leaf shaft on the market today.

    Series 750 Leaf Shaft – designed for heavy-duty in 7 inch to 24 inch (177.8 mm to 609.6 mm) ID cores, as well as in coreless operations. The largest diameter leaf shaft available, this shaft is excellent for tougher jobs such as winding metal and foil strips. It can also be used as a reel spool for Paper reels and large paper machines

    Read More

  • Mark Andy Digital Presses – Digital Series HD

    Built upon the industry-leading Performance Series platform, Mark Andy Digital Series HD is a commercial approach for any size job. It leverages the advantages of digital with the proven capabilities of flexo printing to provide the most profitable total production hybrid solution.

    Read More

  • Tidland D490 Differential Shaft

    D490 Differential Shafts hold rolls straight and true. Interchangeable cartridges allow you to determine how the shaft engages the core to best suit the material and core you’re running. Choose from a heavy gauge wire spring design (D490S) for fiber cores, or a 2-row, 12-ball, torque activated design (D490B) for fiber or PVC cores.

    The result is improved finished roll quality, reduced scrap and fast, easy setups for even the most sensitive materials. Because D490 Differential Shafts are manufactured in North America, Europe and China, they are easily sourced and supported worldwide. All components conform to Tidland’s high quality standards and are interchangeable regardless of where the shaft is installed.

    Read More