The SE-46C digital line sensor is capable of detecting lines, edges of lines and graphic patterns such as barcodes. It can also be used in low contrast conditions or with different patterns located close to each other, where traditional line sensors do not work. The SE-46C can also edge guide transparent films.
The OI-TS control panel for the SE-46C line sensor features a color touch screen, allowing for the image of the web to be displayed in full color, making the sensor calibration easy and intuitive. It is sufficient for the operator to select the desired reference line and press the automatic calibration key.
Thanks to the 30 mm wide field of view and the high resolution, the SE-46C sensor is suitable for the most demanding line guiding applications.
With Tidland’s Equalizer Model D3 Differential Air Shaft, operators can run a variety of different roll widths with adjustable pressure all along the length at the same time. The Equalizer D3 is guaranteed to provide core positioning with adjustable air pressure without spacers or core stop setup. It’s designed for duplex center or surface winders for multiple roll tension equalization. When not covered by the core, tension elements mechanically lock in place to secure core position through the entire run. The D3 requires no tools for core stops, no core stop positioning. Use these air shafts and say “No” to tools, spacers, core shifts and waiting for core position setup.
Built upon the industry-leading Performance Series platform, Mark Andy Digital Series HD is a commercial approach for any size job. It leverages the advantages of digital with the proven capabilities of flexo printing to provide the most profitable total production hybrid solution.
Series 800 shafts feature innovative two-piece expanding elements, which deliver an impressive combination of balance and torque. These advanced shafts also feature self retraction, durable poly bladder, and a fail-safe multi-circuit air system, with check valves to ensure that a loss of air in one element will not affect the expansion and performance of the other elements.
The Series 800 Strip Shaft is designed for medium- to heavy-duty in 76.2 mm (3 inch) to 508 mm (20 inch) ID cores. This shaft’s full-length strip design delivers excellent torque characteristics, making it ideal for general duty unwind and rewind applications.
Mark I Roll Saver Adapters
These adapters are available in three sizes and may be used in combination with the Mark I Roll Saver to restore 101.6 mm (4 inch), 127 mm (5 inch), 152.4 mm (6 inch) and 171.5 mm (6 3/4 inch) crushed cores.
Mark I Roll Saver Sledge Weight
The Sledge Weight is a useful tool for driving the Mark I Roll Saver into difficult cores. It’s better, simpler, and safer than any type of sledgehammer 9 kg (20 lb) weight.
