Wide Band Sensors

Filter Products Showing all 3 results
Categories

  • Fife DAC-005 Camera Sensor

    The DAC-005 Diode Array Camera Sensor is the ideal solution for a wide range of difficult to sense materials from nonwovens to steel. The camera utilizes a total of 7,725 pixels and it can split the field of view into 31 sub-areas, creating virtual sensors. Each virtual sensor can detect one edge out of 255 total.

    The small housing, internal light source and different C-mount lenses allow an installation under tight field conditions. Backward compatible with older F-mount lenses as an option. Its digital sensing offers high resistance to contamination, dust particles, oil, vapors, and water.

    This sensor also has the ability to connect via Analog or Digital with fieldbus interfaces and runs in a variety of applications ranging from fixed sensor rewinding, center edge, and line guiding to web width measurement with an accuracy up to 0.02%. The DAC-005 is easily set up with D-MAX Operator Interface OI-N or Mini Operator Interface OI-S.

    Read More

  • Fife DSE-17 Wide Band Infrared Sensor

    The DSE-17 is a digital wide proportional band infrared sensor. The sensor is most suitable for applications where opacity or density variations may occur, such as tissue, non-woven, textile, paper, foil, and for many opaque films. It can track up to 4 independent web edges simultaneously.

    When web width variations exist, the wide proportional band of the DSE-17 sensor eliminates the need for the manual repositioning of the sensor.

    Thanks to its IP-65 rating the DSE-17 can be installed even in the presence of water spray or condensation. The digital technique is immune to higher levels of contamination, compared with traditional analog sensors. The contamination of the sensor acrylic window can be monitored via a proportional analog output signal. An air sweep system is available as an option. In addition the DSE-17 sensor is protected against the influence of ambient light.

    Read More

  • Fife TruWide SE-45 Ultrasonic Sensor

    Demanding materials, multiple webs and web width variation are easy to control when you have the right sensor for the job. For years, Fife has delivered a complete family of durable, reliable sensors to maintain web alignment when you need it most. New TruWide sensor technology gives you an expanded view of the web and the ability to run opaque or clear materials. It accommodates center or edge guiding with proportional band widths ranging from 2.6” (66 mm) to 20.28” (515 mm) and 16-bit resolution for more accuracy than ever before. Choose analog for stand-alone monitoring or digital operation for multiple edge and web width detection capability. And because it’s a Fife, you know it’ll be there for the long haul.

    Read More