Space is always at a premium inside working machinery. MAGPOWR knows this well, and therefore constructed its IPT Current or Voltage to Pressure Transducer as a single-manifold design to surface mount inside a machine enclosure. It is designed to be mounted in any orientation with no affect on performance and offers multiple mounting options. The IPT can be mounted on standoffs through four provided mounting holes, or on a DIN 35 rail using the provided mounting clips, or in a customer supplied DIN 35 Modular Circuit Housing.
Perfect for control applications, the IPT is ready to use right out of the box, requiring no calibration and providing superior response, accuracy, and flow characteristics. Versatile and easy to use, the IPT is an ultra-compact PC board level pressure controller that operates on 115/230 VAC and filtered dry shop air, and can accept either a current or voltage control input signal.
Tidland’s Model D2 Differential Air Shaft is designed for duplex center or surface winders, whether variable speed control or not. It is simple to set up, easy on the cores and reacts well to multiple roll tension equalization. Quick-to-position tooless locked core stops provide optimum control over roll quality and setup time.
Bottom line is, operators can increase productivity by running varying roll sizes at one time with the help of Tidland’s most affordable differential air shaft
Tidland’s Raptor Series Air Powered Lug Chucks are easy to use and maintain and help eliminate the core damage usually associated with shaftless applications. The Air Powered Lug Chuck is ideal for high-speed printing, laminating, sheeting applications on unwind flying or zero speed splicers and other shaftless unwind/rewind applications. Unlike other chucks, Tidland’s Raptor Series Air Powered Chucks offer on-machine maintenance and toolless adapter changes from 76.2 mm (3 inch) to 305 mm (12 inch) cores in less than 5 seconds.
Mark I Roll Saver Adapters
These adapters are available in three sizes and may be used in combination with the Mark I Roll Saver to restore 101.6 mm (4 inch), 127 mm (5 inch), 152.4 mm (6 inch) and 171.5 mm (6 3/4 inch) crushed cores.
Mark I Roll Saver Sledge Weight
The Sledge Weight is a useful tool for driving the Mark I Roll Saver into difficult cores. It’s better, simpler, and safer than any type of sledgehammer 9 kg (20 lb) weight.
Years of successful roll control in the field testify to the excellent performance of the Leaf Shaft. Designed for a wide range of converting applications, these shafts are best for the elimination of thin wall core deformation. The 360º radial expanding grip along the entire leaf face delivers more winding surface and allows for the winding of single or multiple rolls, with or without cores.
With smooth, polished external leaves, these shafts are particularly suited for delicate materials. Leaf Shafts are built tough, with bodies constructed of standard steel, alloy steel or aluminum, and internal tubes made of durable, hard-wearing rubber. Simple modular construction and standardized components mean quick off-the-shelf spares service and easy in-plant maintenance when necessary.
Series 650 Leaf Shaft – designed for light to medium-duty in 2 inch to 6 inch (50.8 mm to 152.4 mm) ID cores, as well as in coreless operations. The versatility of this shaft has made it the most popular and widely used leaf shaft on the market today.
Series 750 Leaf Shaft – designed for heavy-duty in 7 inch to 24 inch (177.8 mm to 609.6 mm) ID cores, as well as in coreless operations. The largest diameter leaf shaft available, this shaft is excellent for tougher jobs such as winding metal and foil strips. It can also be used as a reel spool for Paper reels and large paper machines
