Tidland Control Series Electronic Knifeholders

Maximize operator safety, productivity and roll quality with Tidland’s newest innovation in slitting. Featuring an LED-backlit touchscreen interface, enhanced durability and available wireless operation, the Control Series offers a dramatic improvement in knifeholder technology.

Available in two models, Control and Control Plus, both allow setup in seconds without operator intervention, resulting in increased consistency, less blade wear and reduced downtime between runs.

The Control Plus model adds closed-loop side force control and real-time monitoring via the onboard touchscreen or PC interface so that settings can be confirmed and consistently maintained.

Available in two models, Control and Control Plus, both allow setup in seconds without operator intervention, resulting in increased consistency, less blade wear and reduced downtime between runs.

The Control Plus model adds closed-loop side force control and real-time monitoring via the onboard touchscreen or PC interface so that settings can be confirmed and consistently maintained.

Request Quote
Categories: , , , ,

Description

Key Features:

  • All-electronic knifeholders with 360 blade guard minimize operator intervention and maximize the safety of your slitting operation
  • Auto-calibration of side force and blade overlap increases slit accuracy and consistency, reducing scrap
  • LED-backlit touchscreen is easy to use, even with gloved hands
  • Available in two models, Control and Control Plus
  • Control Plus adds closed-loop side force control and real-time monitoring to ensure settings are maintained
  • Knifeholder can be controlled locally or via easy-to-use HMI
  • Available wireless operation from any Wi-Fi enabled device

TIDLAND CONTROL SERIES CLASS II AND III

Class II
  • Minimum Slit Width 50.8 mm
  • Maximum Designated Speed*1,676 mpm
  • Blade Diameter 150 mm
  • Electrical Requirement 24 VDC
  • Auto-Calibrate Accuracy+/- 0.5 lbs side force
    +/- 0.003 inch down stroke
Class III
  • Minimum Slit Width 75 mm
  • Maximum Designated Speed*3,000 mpm
  • Blade Diameter 200 mm
  • Electrical Requirement 24 VDC
  • Auto-Calibrate Accuracy+/- 0.5 lbs side force
    +/- 0.003 inch down stroke

Related products

  • Tidland D490 Differential Shaft

    D490 Differential Shafts hold rolls straight and true. Interchangeable cartridges allow you to determine how the shaft engages the core to best suit the material and core you’re running. Choose from a heavy gauge wire spring design (D490S) for fiber cores, or a 2-row, 12-ball, torque activated design (D490B) for fiber or PVC cores.

    The result is improved finished roll quality, reduced scrap and fast, easy setups for even the most sensitive materials. Because D490 Differential Shafts are manufactured in North America, Europe and China, they are easily sourced and supported worldwide. All components conform to Tidland’s high quality standards and are interchangeable regardless of where the shaft is installed.

    Read More

  • Tidland Cyclone™ High Speed Centering Shaft

    The Tidland Cyclone™ Series high speed centering shafts increase throughput by eliminating roll loping and enabling web handling operations to run smoothly at higher speeds. The external
    element, two-stage pneumatic design holds the core concentric to the body, reducing machine vibration and wear.

    The Cyclone Series is available in diameters ranging from 3 inch to over 20 inch.

    Read More

  • Tidland NimCor Roll Restorer

    The NimCor Roll Restorer quickly turns seemingly unusable stock back into profitable inventory by helping to salvage virtually any roll with a crushed or damaged core. The Roll Restorer can also be used to install shafts while restoring damaged rolls.

    Choose from Two Models:
    Standard Model: 50.8 mm to 152.4 mm Core ID
    Heavy Duty Model: 50.8 mm to 304.8 mm Core ID (forklift mountable)

    Read More

  • Tidland Raptor Series Air Powered Lug Chucks

    Tidland’s Raptor Series Air Powered Lug Chucks are easy to use and maintain and help eliminate the core damage usually associated with shaftless applications. The Air Powered Lug Chuck is ideal for high-speed printing, laminating, sheeting applications on unwind flying or zero speed splicers and other shaftless unwind/rewind applications. Unlike other chucks, Tidland’s Raptor Series Air Powered Chucks offer on-machine maintenance and toolless adapter changes from 76.2 mm (3 inch) to 305 mm (12 inch) cores in less than 5 seconds.

    Read More