MAGPOWR Digital Tension Meter

A low-cost way to monitor tension output, the Digital Tension Meter (DTM) is perfect for applications where access to tension control parameters is not required. Operators can mount a control away from the web to get feedback on current web tension via a backlit display and illuminated digits. The DTM is encased in high-impact plastic to withstand demanding conditions. A sealed front panel meets industry-standard NEMA 4X/IP65 specifications for wash-down and dusty environments. This meter can be used with any tension sensor amplifier by reading the 0 to 1 mA meter output reference.

Request Quote
Categories: , , , , ,

Description

Features:

  • Easy to read LCD
  • Built-in scaling
  • Auto zeroing circuit
  • Compact enclosure fits DIN standard cut-out
  • NEMA 4X/IP65 sealed front panel bezel
  • Wire connections made via screw clamp type terminals

MAGPOWR DTM SPECIFICATIONS

  • Display3 1⁄2 digit (-9999 to 9999), Minus (-) sign is displayed when current is negative
  • Power9 to 28 VDC @ 35 mA max Above 26 VDC, derate operating temperature to 50° C
  • Accuracy(@ 23° C, less than 85% RH) ±(0.1% + 1 digit)
  • Input10 mA maximum
    Range of ± 1.000 mADC
  • Reading Rate2.5 readings per second
  • Response Time1.5 seconds for a step change
  • Input Impedance200 MΩ

Related products

  • Tidland Automatic Lug Chuck

    Inexpensive and effective, Tidland’s Automatic Lug Chuck is designed specifically to meet the needs of narrow-web converters. This chuck features spring-loaded, torque activated expanding lugs for economical die cut and trim removal in narrow web applications.

    Read More

  • Tidland Spiral External Element Shaft

    Rewind Applications

    Series 850 takes our innovative two-piece expanding elements to a whole new level. The unique spiral design of the Series 850 provides a continuous 360º of radial grip and intrinsically equalized load distribution. These advanced shafts also feature a two-piece body design, self retraction, durable poly bladder, and a fail-safe multi-circuit air system, with check valves to ensure that a loss of air in one element will not affect the expansion and performance of the other elements.

    The Series 850 Spiral Strip Shaft is designed for medium to heavy-duty in 75 mm (3 inch) to 406 mm (16 inch) ID cores. The spiral strip design of this shaft minimizes vibration to deliver smoother operation and higher speeds. It’s an ideal choice for surface winders or with lay-on rolls.

    Read More

  • Tidland D3 Differential Air Shaft

    With Tidland’s Equalizer Model D3 Differential Air Shaft, operators can run a variety of different roll widths with adjustable pressure all along the length at the same time. The Equalizer D3 is guaranteed to provide core positioning with adjustable air pressure without spacers or core stop setup. It’s designed for duplex center or surface winders for multiple roll tension equalization. When not covered by the core, tension elements mechanically lock in place to secure core position through the entire run. The D3 requires no tools for core stops, no core stop positioning. Use these air shafts and say “No” to tools, spacers, core shifts and waiting for core position setup.

    Read More

  • Tidland External Element Shaft and Core Holder

    Tidland’s Narrow Web Shafts were created specifically to meet the needs of narrow-web converters. These economical shafts are designed to fit any press — with cantilevered, drop-in, flange, and bar mounting styles available.

    Read More