Grafisk Maskinfabrik KU350 DHFM Roll Lifter

The KU350 DHFM is a motorized roll lifter/roll turner that can lift rolls from a pallet, turn them from horizontal into vertical position and place them either on the floor or directly in the rewind/unwind section of a machine.

Description

Specifications Metric
Core diameter 76mm
Expansion mandrel Yes
Roll clamp Double
Turning motor Hydraulic
Laterally moverable arm Yes
Motorized Yes
Battery charger Built-in
Energy meter Yes
Battery [AH] 2x12V/40AH
Dimensions (HxWxL) 2400x810x1600
Weight 500Kg

 

Features Metric
Lifting height 2180mm
Clearance height 1890mm
Max. roll diameter 1300mm
Min. roll diameter 400mm
Max. roll width 500mm
Min. roll width 160mm
Max. roll weight 350kg
Lifts per charge >200

 

Characteristics:

The KU-series are hydraulic roll lifters/roll turners to enable production rolls to be taken down from a pallet, turn them from horizontal into vertical position and place them either on the floor or directly in the rewind/unwind section of the machine where the roll is to be handled. All models have the possibility for a laterally mover able arm and remote control.

Optional

  • Centre mandrel Ø70mm
  • Adapter from Ø70/76mm (~2.8/3.0 in) to Ø152,4mm (~6.0 in) centre mandrel
  • Long pressing plates (clamps) for holding soft, special materials or wide rolls. In that case, the maximum clearance height is reduced by 100mm.
  • Extension (for centre mandrel) for wide rolls (The minimum roll width is reduced to 180mm)