Grafisk Maskinfabrik KU200 Roll Lifter

KU200 Electro-hydraulic Roll Lifter

Mobile electric/hydraulic roll lifters/roll turners. All models are available with remote control and are equipped with an expansion mandrel and a roll holder preventing telescoping of the roll. Max. roll weight 200 kg. A laterally movable lever arm is standard on the KU200

Request Quote
Categories: , , , ,

Description

Specifications Metric
Core diameter 76mm
Expansion mandrel Yes
Roll clamp Double
Turning motor Hydraulic
Laterally moverable arm Yes
Motorized No
Battery charger Built-in
Energy meter Yes
Battery [AH] 2x12V/40AH
Dimension (HxWxL) 1,8 x 0,5 x 1,5 m
Weight

Characteristics:

The KU-series are hydraulic roll lifters/roll turners to enable production rolls to be taken down from a pallet, turn them from horizontal into vertical position and place them either on the floor or directly in the rewind/unwind section of the machine where the roll is to be handled. All models have the possibility for a laterally mover able arm and remote control.

Optional

  • Centre mandrel Ø70mm
  • Adapter from Ø70/76mm (~2.8/3.0 in) to Ø152,4mm (~6.0 in) centre mandrel
  • Long pressing plates (clamps) for holding soft, special materials or wide rolls. In that case, the maximum clearance height is reduced by 100mm and the minimum roll width is increased by 100mm only applies to KU200.
  • Extension (for centre mandrel) for wide rolls (The minimum roll width is reduced to 180mm)

Related products

  • Grafisk Maskinfabrik KU350 DHFM Roll Lifter

    The KU350 DHFM is a motorized roll lifter/roll turner that can lift rolls from a pallet, turn them from horizontal into vertical position and place them either on the floor or directly in the rewind/unwind section of a machine.

    Read More

  • Fife Electrohydraulic Power Units

    Specifically designed for web guiding, Electrohydraulic Power Units are ideal for use with Fife’s full line of electronic sensors and signal controllers. These power units incorporate our exclusive 2-stage, high-resolution, spool-type servo valve to provide precise, proportional control regardless of material or load requirements.

    Equipped with their own hydraulic reservoir, pump, filter, and relief valve, all standard models can be used for single, double, or triple guiding installations. By utilizing one or more servo valves, a single power unit simultaneously, yet independently, is capable of handling up to three separate guiding operations. For more than three, a combination of power units may be used

    Read More

  • Schlumpf USA Heavy Duty Shaft Handler

    Schlumpf’s heavy duty, portable shaft handlers – Superior performance and quality.

    At Schlumpf, we offer a range of options for customers looking for portable shaft handling machines. We are confident that we can meet your needs, regardless of your industry or application. Custom solutions are available for clients with highly-specialized needs.

    Schlumpf offers heavy duty shaft handlers that lift, turn and rotate heavy shafts, reel spools and tissue core plugs. Schlumpf heavy duty shaft handlers were designed to increase safety and productivity. Our selection includes three models of shaft handlers: the Speedy Shaft Handler, the Master Shaft Handler and the Delta Shaft Handler. All of these models offer the following features:

    • Hydraulic side shift option
    • Hydraulic tooling tilt up option
    • Spare tooling holder
    • Clamp pressure sensor
    • Shaft present sensor with lift over ride switch
    • Travel speed restriction when load is raised
    • Fixed straddle, adjustable or Euro pallet legs
    • 115 VAC or 230 VAC automatic battery chargers
    Read More

  • Fife Pneumohydraulic Power Units

    Fife Pneumohydraulic Power Units are specifically designed for web guiding, providing superior response and control with fully proportional corrective action. Power units are equipped with our exclusive four-way, spool-type servo valve to deliver unmatched sensitivity and stability in guiding applications for all types of materials, at any speed, under any load.

    Completely self-contained, these Pneumohydraulic Power Units have a built-in regulated air system with a pump, filters, and regulator, as well as their own hydraulic reservoir, pump, filter and relief valve. External air is not required. Pneumohydraulic power units can be supplied with one, two or three servo valves on a single power unit. One power unit simultaneously, yet independently, can handle up to three separate guiding operations. For more than three guiding operations, a combination of power units may be used.

    Read More