The SE-23 Infrared Sensor delivers the unique combination of compact design and wide band versatility. This sensor has a control range of 50.8 mm (2.0 inches) and a standard sensing gap of 50.8 mm (2.0 inches).
Used widely in pairs to center guide, the SE-23 delivers unmatched performance for nonwoven and other materials where neck-down of the web is a problem. Additionally, the SE-23 can be used where substantial variations in the guide point are required.
Series 850 takes our innovative two-piece expanding elements to a whole new level. The unique spiral design of the Series 850 provides a continuous 360º of radial grip and intrinsically equalized load distribution. These advanced shafts also feature a two-piece body design, self retraction, durable poly bladder, and a fail-safe multi-circuit air system, with check valves to ensure that a loss of air in one element will not affect the expansion and performance of the other elements.
The Series 850 Spiral Strip Shaft is designed for medium to heavy-duty in 75 mm (3 inch) to 406 mm (16 inch) ID cores. The spiral strip design of this shaft minimizes vibration to deliver smoother operation and higher speeds. It’s an ideal choice for surface winders or with lay-on rolls.
Versatility is important for so many pieces of equipment, accessories and components, yet so few actually deliver. Tidland’s expansion shafts are specifically designed for applications where core size variation is common. Operators can adjust the core diameter of the shaft while it remains on the machine, eliminating the need to stock multiple shafts and drastically reducing setup time.
A digital label press designed to free up capacity on high output flexo presses, and bring greater efficiency to fast turnaround work. Built specifically for short run prime labels, Mark Andy Digital One makes digital printing more accessible to narrow-web converters.
Mark I Roll Saver Adapters
These adapters are available in three sizes and may be used in combination with the Mark I Roll Saver to restore 101.6 mm (4 inch), 127 mm (5 inch), 152.4 mm (6 inch) and 171.5 mm (6 3/4 inch) crushed cores.
Mark I Roll Saver Sledge Weight
The Sledge Weight is a useful tool for driving the Mark I Roll Saver into difficult cores. It’s better, simpler, and safer than any type of sledgehammer 9 kg (20 lb) weight.
