Because of its compact size and insensitivity to ambient light, the digital infrared sensor DSE – 22 is the ideal solution for many applications where accurate web guiding is required.
The DSE – 22 Infrared Sensor measures the lateral position of the guided material photo electrically. The control range (proportional band) allows significant guide point adjustment. The DSE – 22 is often used in pairs for centre guiding when web width variations are limited. Its excellent technical specifications allow it to also be used with a Fife processor to guide clear film. Normally the DSE – 22 is used for guiding opaque materials.
It is possible to operate the DSE – 22 with either a supply voltage of 12 V or 24 V. The output signal would automatically be switched over in that case. In 12 V supply mode the sensor provides an output signal from 0 to 10 mA and can be connected to all available Fife web guide processors. In 24 V supply mode the sensor supplies an output signal between 4 and 20 mA and can be easily connected to a PLC as well.
The DSE – 22 has a built-in LED display, visible from both sides, and shows directly on the sensor information about the operating status like for instance the existence of the supply voltage, position of the edge of the web inside the field of view or error messages.
Tidland’s Air Brakes deliver reliable continuous tension control for a wide variety of applications. These single rotor, high output brakes feature a unique convection design for dissipating heat resulting in superior performance and prolonged pad life with models capable of handling a maximum torque range of 1,430 lb-in to 23,700 lb-in.
These Air Brakes are durable construction for your most demanding braking needs and can be custom configured for your exact tension and braking needs, whether that be delicate tissue, heavy-weight liner board, textile, film or foils.
With Tidland’s Equalizer Model D3 Differential Air Shaft, operators can run a variety of different roll widths with adjustable pressure all along the length at the same time. The Equalizer D3 is guaranteed to provide core positioning with adjustable air pressure without spacers or core stop setup. It’s designed for duplex center or surface winders for multiple roll tension equalization. When not covered by the core, tension elements mechanically lock in place to secure core position through the entire run. The D3 requires no tools for core stops, no core stop positioning. Use these air shafts and say “No” to tools, spacers, core shifts and waiting for core position setup.
The Performance Series P5E features advanced servo controlled print station and die cutting platform design. The P5E is engineered for the converter looking to achieve productivity, extremely quick changeover and high quality levels at an appealing value.
Building on the unique print station design common to all Performance Series presses, the P5 is focused on productivity and efficiency. Its modular servo platform can be configured to support a variety of pressure sensitive and film applications.
Tidland’s Narrow Web Shafts were created specifically to meet the needs of narrow-web converters. These economical shafts are designed to fit any press — with cantilevered, drop-in, flange, and bar mounting styles available.
