The DSE – 11 digital infrared sensor is the smallest infrared sensor available from Fife. Because of its compact size, light weight, and insensitivity to ambient light, it is ideal for many applications where accurate web guiding is required and space is limited.
The DSE – 11 Infrared Sensor measures the lateral position of the guided material photo electrically. The control range (proportional band) allows significant guide point adjustment. The DSE – 11 is often used in pairs for centre guiding when web width variations are limited. Its excellent technical specifications allow it to also be used with a Fife processor to guide clear film. Normally the DSE – 11 is used for guiding opaque materials.
It is possible to operate the DSE – 11 with either a supply voltage of 12 V or 24 V. The output signal would automatically be switched over in that case. In 12 V supply mode the sensor provides an output signal from 0 to 10 mA and can be connected to all available Fife web guide processors. In 24 V supply mode the sensor supplies an output signal between 4 and 20 mA and can be easily connected to a PLC as well.
The DSE – 11 has a built-in LED display, visible from both sides, and shows directly on the sensor information about the operating status like for instance the existence of the supply voltage, position of
the edge of the web inside the field of view or error messages.
Tidland’s Air Brakes deliver reliable continuous tension control for a wide variety of applications. These single rotor, high output brakes feature a unique convection design for dissipating heat resulting in superior performance and prolonged pad life with models capable of handling a maximum torque range of 1,430 lb-in to 23,700 lb-in.
These Air Brakes are durable construction for your most demanding braking needs and can be custom configured for your exact tension and braking needs, whether that be delicate tissue, heavy-weight liner board, textile, film or foils.
Tidland’s Model D2 Differential Air Shaft is designed for duplex center or surface winders, whether variable speed control or not. It is simple to set up, easy on the cores and reacts well to multiple roll tension equalization. Quick-to-position tooless locked core stops provide optimum control over roll quality and setup time.
Bottom line is, operators can increase productivity by running varying roll sizes at one time with the help of Tidland’s most affordable differential air shaft
Inexpensive and effective, Tidland’s Automatic Lug Chuck is designed specifically to meet the needs of narrow-web converters. This chuck features spring-loaded, torque activated expanding lugs for economical die cut and trim removal in narrow web applications.
Mark I Roll Saver Adapters
These adapters are available in three sizes and may be used in combination with the Mark I Roll Saver to restore 101.6 mm (4 inch), 127 mm (5 inch), 152.4 mm (6 inch) and 171.5 mm (6 3/4 inch) crushed cores.
Mark I Roll Saver Sledge Weight
The Sledge Weight is a useful tool for driving the Mark I Roll Saver into difficult cores. It’s better, simpler, and safer than any type of sledgehammer 9 kg (20 lb) weight.
