Tidland

Filter Products Showing 1 - 12 of 27 results
Categories

  • Tidland Slitter Model SP-500 / MSP-A

    The Tidland Slitter Model SP-500 will help operators run more efficiently by increasing the speed and accuracy of knife positioning and minimizing the frequency and complexity of maintenance — two of the main factors in realizing a quick return on investment. This slitter provides the best mix of new technology and proven performance as it is designed to improve profitability and production efficiency by increasing positioning speed, accuracy, and consistency.

    Read More

  • Tidland ESP – Electronic Slitter Positioning System

    Designed to save downtime and increase productivity, Tidland’s ESP – Electronic Slitter Positioning System allows an operator to move 10 knives in under one minute with the web in place with accuracy of +/- 0.1 mm (0.004 inch) deviation.

    Created for use in mill finishing and other large-scale converting operations, the ESP delivers intuitive, easy-to-use touch screen interfaces and can retrofit to most winders regardless of web path. Typical materials include: coated and uncoated boards, tissue, newsprint and fine papers. This robust system has been specifically designed to perform reliably in the most demanding environments.

    The ESP’s modular design allows for easy upgrade from the manual version, and easy retrofitting into numerous brands of winders, offering the benefits of standardized parts. Converting to ESP’s automatic system affords the benefits of trim management, unlimited set pattern memory and computer software that is easy-to-use, and can be integrated into your mill-wide systems.

    Read More

  • Tidland Control Series Electronic Knifeholders

    Maximize operator safety, productivity and roll quality with Tidland’s newest innovation in slitting. Featuring an LED-backlit touchscreen interface, enhanced durability and available wireless operation, the Control Series offers a dramatic improvement in knifeholder technology.

    Available in two models, Control and Control Plus, both allow setup in seconds without operator intervention, resulting in increased consistency, less blade wear and reduced downtime between runs.

    The Control Plus model adds closed-loop side force control and real-time monitoring via the onboard touchscreen or PC interface so that settings can be confirmed and consistently maintained.

    Available in two models, Control and Control Plus, both allow setup in seconds without operator intervention, resulting in increased consistency, less blade wear and reduced downtime between runs.

    The Control Plus model adds closed-loop side force control and real-time monitoring via the onboard touchscreen or PC interface so that settings can be confirmed and consistently maintained.

    Read More

  • Tidland Performance Series Knifeholders

    Providing faster setups, increased productivity and unrivaled finished roll quality, the revolutionary Performance Series Knifeholder is available in three sizes to accommodate a wide range of slitting materials and web speed, for shear, crush and razor slitting of a wide range of applications, from very light converting to mill duty finishing operations. Operators can choose from a variety of design options, selecting a knifeholder specific to your needs.

    Read More

  • Safety Accessories for Tidland Knifeholders and Blades

    There is no acceptable level of accidents, one is too many. That’s why we think about safety issues with every product we make. Innovations like our new blade guard provide extra protection and can be easily retrofitted to any Tidland slitter. Tidland Knifeholders feature a removable cartridge so blades can be more safely changed on a workbench. When you choose Tidland, you’ve made safety a key part of your selection criteria.

    360 Degree Blade Guard
    The 360 degree blade guard protects an operator from sharp blades while handling knifeholders off of the machine. Available for Class I, Class II, and Class III Tidland Knifeholders.

    Bench Mount Fixture and Safety Gloves
    Tidland’s convenient bench-mount fixture mounts easily to any workbench with two screws. It features a dovetail guide bar to hold the knifeholder cartridge securely and free up operator hands while performing basic maintenance on the knifeholder. Tidland safety gloves help to protect operator hands when working with sharp blades.

    Blade Guard Attachments
    Retrofit existing e-Knifeholders, Performance Series, Series C and other knifeholders with a low-cost blade guard to reduce operator injury. This guard is an inexpensive way to minimize the risk of operator injury while upper and lower knives are engaged. Each blade guard attaches directly to the existing knifeholder, acting as an extension to alert operators when they are too close to the blade, giving them more time to react.

    Read More

  • Tidland Mark I and II Roll Savers

    Save your crushed core with Tidland’s Mark I or Mark II Roll Savers. These roll savers are designed to re-open crushed cores, allowing for shaft insertion on rolls that would otherwise be considered scrap material. The Roll Saver provides a return on your investment with its first use as the cost is comparable to that of a damaged roll, creating a positive impact on profit margins and warehouse space. Air shafts cannot be inserted into rolls with even with the slightest deformation, leaving damaged rolls useless. With a Tidland portable hydraulic Roll Saver, rolls can be salvaged.

    Read More

  • Tidland Air Brakes

    Tidland’s Air Brakes deliver reliable continuous tension control for a wide variety of applications. These single rotor, high output brakes feature a unique convection design for dissipating heat resulting in superior performance and prolonged pad life with models capable of handling a maximum torque range of 1,430 lb-in to 23,700 lb-in.

    These Air Brakes are durable construction for your most demanding braking needs and can be custom configured for your exact tension and braking needs, whether that be delicate tissue, heavy-weight liner board, textile, film or foils.

    Read More

  • Tidland Air Chucks

    These rugged, high-torque air chucks have established a reputation for reliable, non-slip grip that delivers maximum roll control, and permits the running of machines at maximum speed. Air Chucks grip a wide area of the inside core wall with a firm, even pressure that prevents slippage and increases core life. Popular models and sizes from NimCor have been added to the Tidland offering, creating the industry’s largest selection of Air Chucks to suit any need.

    Read More

  • Tidland External Element Shaft and Core Holder

    Tidland’s Narrow Web Shafts were created specifically to meet the needs of narrow-web converters. These economical shafts are designed to fit any press — with cantilevered, drop-in, flange, and bar mounting styles available.

    Read More

  • Tidland Roll Centering Leaf Shaft

    This narrow web shaft’s three-leaf design minimizes thin wall core deformation and improves roll quality. For rewinds, special centering ribs in-between expanding leaves position cores closer to the center of rotation, resulting in better-quality finished rolls.

    Read More

  • Tidland Automatic Lug Chuck

    Inexpensive and effective, Tidland’s Automatic Lug Chuck is designed specifically to meet the needs of narrow-web converters. This chuck features spring-loaded, torque activated expanding lugs for economical die cut and trim removal in narrow web applications.

    Read More

  • Tidland Cyclone™ High Speed Centering Shaft

    The Tidland Cyclone™ Series high speed centering shafts increase throughput by eliminating roll loping and enabling web handling operations to run smoothly at higher speeds. The external
    element, two-stage pneumatic design holds the core concentric to the body, reducing machine vibration and wear.

    The Cyclone Series is available in diameters ranging from 3 inch to over 20 inch.

    Read More