Ashe Converting Equipment
-
Ashe Labelstock/Paper Slitter Rewinder
Read MoreOur Labelstock slitter rewinder is based on our Jade series of slitting machines. With centre surface capabilities the machine is able to wind with individual rewind stations, a full width differential rewind shaft, or with an airshaft. The shaftless or shafted rewinding system both utilise a linear tracking system away from the contact roller to give a perfect finished roll, in profile and tension.
As with all ASHE machines, our vacuum roller is utilised on the machine to give us perfect tension isolation and does not scratch or deform the most sensitive of labelstocks.
A range of options, such as automatic unloading systems are available on the machine with online roll wrapping, and weighing. Other options such as knife positioning systems, web cleaners etc are all available on the machine.
We are also able to produce a range of two drum surface winders, for paper mills and paper converters. We are able to produce such machines with rewind diameters of up to 1800mm.
-
Ashe Sapphire S2
Read MoreSapphire S2 Slitter Rewinder
The Sapphire S2 is the only choice for ease of operation, repeatability and minimal downtime. The machine is acclaimed for its versatility in being able to handle many different products, without any changes to the machine operation.
Our vacuum roller technology is a key feature of the machine, which requires no operator setting or maintenance throughout the life of the machine. The machine is also a total electric operation, no hydraulics are used in the machine.
The machine has a maximum running speed of up to 800m/min and can be equipped with many options for automation, which help in reducing setup times. It is also now available in three rewind diameter configurations, being 600mm, 800mm or 1000mm.
-
Ashe Sapphire S2T Turret
Read MoreSapphire S2T Turret Slitter Rewinders
The Sapphire S2T is the choice for the converter that is looking for maximum productivity and minimum downtime. This is achieved by the machine continuing to run, whilst the operator (or machine) takes off the finished rolls and puts new cores onto the rewind shaft.
The cycle time of the Sapphire S2T can be as low as 15 seconds and will automatically cut the web (at set length), and apply the new incoming web onto new cores.
Once again, the Sapphire S2T utilises our vacuum roller technology, and most options for minimising job setups can be added to the machine to increase productivity further. It also features a unique shaft support system (for larger rewind diameters) where the rewind shafts remain fully supported through the turreting sequence.
-
Ashe Diamond
Read MoreDiamond Duplex Rewinder
The Diamond model has been designed to be a compact, cost effective solution whilst keeping production requirements in mind. The machine has been based on our renowned Sapphire range of machines, and therefore has the flexibility to be able to slit and rewind most products at high speeds.
The machine is available in various configurations and all options within ASHE’s range are available to add onto the machine. The machine uses the ASHE vacuum roller technology and is hydraulic free, making it a total clean operation.
The machine is supplied in a ‘one piece’ configuration, therefore making shipping and installation easy.
-
Ashe Opal Inline and Offline Turret Rewinders
Read MoreLabel Inline and Offline Turret Rewinders
The Opal turret range gives you matchless results even for the most challenging of finishes. From our competitively priced applications right through to the advanced glueless technology, all machines are ideal for narrow web producers.
Your Opal can be set to run a given length or number of labels and will then cut and transfer the web without stopping. Each machine can run light or high tensions to allow a wider range of materials to run on one machine.