Label Printers
-
Harper Corporation XLT™ Anilox Roll
Read MoreThe XLT™ digital technology was developed for precisely transferring thin ink films with micron accuracy. We recommend and guarantee that when you work with the strongest, thinnest film of ink, you will get the best ink mileage, best print quality, easiest impression set-up, and you’ll get it at the most consistent levels possible.
-
Harper Corporation XVR™ Anilox Roll
Read MoreThe XVR™ digital technology was developed for precisely transfering thin ink films with micron accuracy. We recommend and guarantee that when you work with the strongest, thinnest film of ink, you will get the best ink mileage, best print quality, easiest impression set-up, and you will get it at the most consistent level possible.
-
GEW E2C UV/LED Curing System
Read MoreGEW’s E2C is the most powerful low energy UV curing system for narrow web presses.
The E2C UV curing system with RHINO electronic power supply takes curing of inks and coatings to new levels of productivity and print run security. The E2C-RHINO systems use substantially less energy. They enable colour process printing at full production speed with as little power as 90 W/cm (230W/inch).
E2C UV curing systems are safe for the widest range of heat-sensitive materials with no heat transfer to the machine or substrate at stand-by through the use of actively air cooled shutter technology.
E2C systems are available with inert atmosphere curing. They can easily be upgraded to LED curing by using the same RHINO ArcLED electronic power supply.
Where alternative products exploit conventional curing technologies that often neglect energy monitoring, GEW state of the art UV systems implement advanced UV lamphead technology associated with the most energy efficient power supplies. E2C RHINO systems come with the additional benefit of a comprehensive 5-year warranty unique in its industry.
-
GEW ArcLED Hybrid UV Curing Systems
Read MoreTWO UV Curing Technologies
ONE RHINO Power SupplyArcLED allows use of a conventional UV mercury arc lamp or LED (light emitting diode) array on the same print unit. Both arc and LED cassettes are compatible with the same power supply and fit in the same housing for ease of change.
The RHINO control enables any combination of curing technologies to be used on the same press.
Future proof UV technology
GEW arc and LED systems can both be upgraded in the field to the hybrid solution or be supplied in this configuration from new.
ArcLED enables hybrid, interchangeable UV curing on every print station, allowing the printer to use a combination of arc and LED technology seamlessly on the same press and to switch between arc and LED curing at will to suit process requirements and ink formulation.
-
GEW NUVA2 UV Curing System
Read MoreFully air-cooled UV curing system
The NUVA2 UV curing system is the most effective UV technology for colour UV inkjet printing, as well as for high-speed coding, marking and serialisation. NUVA2 are fully air-cooled UV curing systems. They are available in widths of up to 250cm (100in).
RHINO embedded service technology continuously monitors the system, thus guarding against out-of-specification parameters that could result in an unplanned stoppage. GEW UV systems are engineered for operation in the most challenging conditions. They come with a 5-year warranty to avoid unexpected maintenance costs.
With NUVA2 UV curing, your machine runs faster for longer, with less energy and no downtime.
E2C systems are available with inert atmosphere curing. They can easily be upgraded to LED curing by using the same RHINO ArcLED electronic power supply.
Where alternative products exploit conventional curing technologies that often neglect energy monitoring, GEW state of the art UV systems implement advanced UV lamphead technology associated with the most energy efficient power supplies. E2C RHINO systems come with the additional benefit of a comprehensive 5-year warranty unique in its industry.
-
Ashe Labelstock/Paper Slitter Rewinder
Read MoreOur Labelstock slitter rewinder is based on our Jade series of slitting machines. With centre surface capabilities the machine is able to wind with individual rewind stations, a full width differential rewind shaft, or with an airshaft. The shaftless or shafted rewinding system both utilise a linear tracking system away from the contact roller to give a perfect finished roll, in profile and tension.
As with all ASHE machines, our vacuum roller is utilised on the machine to give us perfect tension isolation and does not scratch or deform the most sensitive of labelstocks.
A range of options, such as automatic unloading systems are available on the machine with online roll wrapping, and weighing. Other options such as knife positioning systems, web cleaners etc are all available on the machine.
We are also able to produce a range of two drum surface winders, for paper mills and paper converters. We are able to produce such machines with rewind diameters of up to 1800mm.
-
Ashe Sapphire S2
Read MoreSapphire S2 Slitter Rewinder
The Sapphire S2 is the only choice for ease of operation, repeatability and minimal downtime. The machine is acclaimed for its versatility in being able to handle many different products, without any changes to the machine operation.
Our vacuum roller technology is a key feature of the machine, which requires no operator setting or maintenance throughout the life of the machine. The machine is also a total electric operation, no hydraulics are used in the machine.
The machine has a maximum running speed of up to 800m/min and can be equipped with many options for automation, which help in reducing setup times. It is also now available in three rewind diameter configurations, being 600mm, 800mm or 1000mm.
-
Ashe Sapphire S2T Turret
Read MoreSapphire S2T Turret Slitter Rewinders
The Sapphire S2T is the choice for the converter that is looking for maximum productivity and minimum downtime. This is achieved by the machine continuing to run, whilst the operator (or machine) takes off the finished rolls and puts new cores onto the rewind shaft.
The cycle time of the Sapphire S2T can be as low as 15 seconds and will automatically cut the web (at set length), and apply the new incoming web onto new cores.
Once again, the Sapphire S2T utilises our vacuum roller technology, and most options for minimising job setups can be added to the machine to increase productivity further. It also features a unique shaft support system (for larger rewind diameters) where the rewind shafts remain fully supported through the turreting sequence.
-
Tidland Mark I and II Roll Savers
Read MoreSave your crushed core with Tidland’s Mark I or Mark II Roll Savers. These roll savers are designed to re-open crushed cores, allowing for shaft insertion on rolls that would otherwise be considered scrap material. The Roll Saver provides a return on your investment with its first use as the cost is comparable to that of a damaged roll, creating a positive impact on profit margins and warehouse space. Air shafts cannot be inserted into rolls with even with the slightest deformation, leaving damaged rolls useless. With a Tidland portable hydraulic Roll Saver, rolls can be salvaged.
-
Amut Bielloni Axsa ST
Read MoreStack model, suitable for printing on different colours combinations on industrial sacks and paper
-
Amut Bielloni Axsa SLV
Read MoreModel with C.I. drum suitable for printing on any flexible materials at high speed.
-
Amut Bielloni Telia FSC – Maxi
Read MoreModel suitable for long runs, for large printing repeats and for wide web widths. Ideal for printing on any flexible materials, paper and tubolar film.