Meters And Accessories
-
MAGPOWR Digital Tension Meter
Read MoreA low-cost way to monitor tension output, the Digital Tension Meter (DTM) is perfect for applications where access to tension control parameters is not required. Operators can mount a control away from the web to get feedback on current web tension via a backlit display and illuminated digits. The DTM is encased in high-impact plastic to withstand demanding conditions. A sealed front panel meets industry-standard NEMA 4X/IP65 specifications for wash-down and dusty environments. This meter can be used with any tension sensor amplifier by reading the 0 to 1 mA meter output reference.
-
MAGPOWR TR-5
Read MoreThe MAGPOWR TR-5 Tension Readout is a device for measuring tension in a moving web, strand, wire or narrow tape. It uses either one or two MAGPOWR load cells and interconnection cables.
This system can be used on any non-driven idler roll or at any position where the wrap angle of the web or strand does not change. Each load cell contains four foil type strain gages bonded to a sensing beam. These gages convert the load on the roll or sheave to an electrical signal. Within the TR-5, the signal from the load cells is amplified and displayed on the tension meter.
The amplifier of the TR-5 has low drift and high linearity, with a gain control range of 8:1 and tare adjustment of 50%. An auxiliary 0 to 10 VDC, or 4 to 20 mADC output is provided for interfacing to other products or systems.
-
-